Reinforced with paper
Part of: 39219040 — Other: — Flexible
N266825 · 2015-08-11 — The tariff classification of flexible packaging material
Samples were provided. Your submission addresses three styles of flexible packaging material, identified by product numbers AP1510 (Lidocaine Transdermal Pouch), AP 982 (Transdermal Base Stock), and AP-723 (Transdermal Pouch). All three styles consist of a sheet of aluminum foil 3.5 mils thick laminated on both sides with layers of plastic sheeting, and are intended to be used as packaging for transdermal patches. Per the information provided, all three styles are shipped in roll form. Style AP 1510 consists of an aluminum foil sheet laminated with layers of polyethylene terephthalate (PET)…
N254726 · 2014-07-18 — The tariff classification of high pressure decorative laminates from China
The sample provided with your request, identified as Nevamar high pressure laminate, is a sheet made from layers of kraft paper, including a decorative top layer, impregnated with resin and cured under high pressure to form a solid laminate. The laminates will be imported in the form of sheets measuring 48 inches by 96 inches. Classification depends on whether the sheets, in their imported condition, are flexible, i.e., whether they can be flexed so that the two ends touch and then return to their original shape without evidence of creasing, cracking or distortion. Although the small sample…
N238789 · 2013-03-22 — The tariff classification of decorative plastic and metal laminates from Canada.
Representative samples were included with your submission and will be retained by this office. The items under consideration are described as decorative plastic and metal laminates for both residential and commercial use. You state that these laminates are suitable for application to interior surfaces where a decorative wear stain and impact resistant surface is required such as countertops, tabletops, cabinets, furniture, etc. The plastic laminates are sheets made of plain, colored or decorative paper coated or impregnated with melamine-formaldehyde resins which are pressed together with…
N065161 · 2009-07-15 — The tariff classification of high pressure decorative laminates from China.
Reichwein, dba DPR Inc., you requested a tariff classification ruling. A sample was provided with your letter. The product is a laminated sheet made from layers of kraft paper with a decorative top surface paper. You state that the back surface is impregnated with phenolic resin and the top surface is impregnated with melamine resin. The layers are laminated together under high pressure and temperature using a metal plate. The resultant laminate is said to be used as a cabinet liner. The high pressure decorative laminates will be supplied in rectangular sheet form measuring 48 inches by 96…
N038320 · 2008-09-25 — The tariff classification of high pressure laminates from China.
The high pressure laminates will be imported under the product name ColorCore®2 by Formica®. You state that the laminates are made by combining melamine-impregnated decorative surface papers with resin treated kraft paper, which is then consolidated in a press at high pressures. The sheet back is then sanded to maintain a uniform thickness and to facilitate bonding with other substrates, such as fiberboard or particleboard. The thickness of the laminates is approximately 0.04 inch. The laminates will be imported in sheets measuring 48 inches by 120 inches. After importation they will be used…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product