Other
Part of: 39219040 — Other: — Flexible
N362111 · 2026-06-10 — The tariff classification of phenolic resin-based film reinforced with glass fiber (prepreg) from the United Kingdom
The product under consideration is a thermoset phenolic resin-based prepreg in film form containingcontinuous glass fiber reinforcement. The glass fiber reinforcement is said to be fully impregnated withphenolic resin. The product will be imported in rolls in widths of approximately 50 inches and lengths of50-55 meters. At the time of importation, the material is a flexible, B-staged composite prepreg. Followingimportation, the material is cut, shaped and cured under heat and pressure to produce rigid composite panelsused in aircraft interior structural applications. The material has no…
N333153 · 2023-06-14 — The tariff classification of polyethylene high-performance reflective insulation from Canada
The product under consideration is M1V High-Performance Reflective insulation. The sample provided is a 4 mm sheet consisting of three layers: an outer sheet of metallized polyethylene, center bubble sheet and an outer sheet of white polyethylene. The product is intended for use as an insulation or vapor barrier in a variety of construction applications. The applicable subheading for the polyethylene high-performance reflective insulation will be 3921.90.4090, Harmonized Tariff Schedule of the United States (HTSUS), which provides for other plates, sheets, film, foil and strip, of plastics:…
N328049 · 2022-12-15 — The tariff classification of peel heat seals from the United Kingdom
Samples were submitted to the CBP Laboratory for analysis. Product 4ti-0522 is referred to as a Peel Heat Seal used to seal polypropylene plates to provide moderate solvent resistance for short time storage at room temperature. The sheet is constructed of three layers bonded together. Documentation states that the product consists of a 0.012 mm layer of polyester film, a 0.008 mm center layer of aluminum foil and a 0.05 mm peel layer of polyethylene. CBP Laboratory analysis confirms that the relative weight of the plastics is greater than aluminun in percentage. Product 4ti-0586 is referred…
N326168 · 2022-06-03 — The tariff classification of silicone coated woven fiberglass from China
The product is described as a woven electrical grade glass fabric. It consists of a woven fiberglass fabric that is coated on both sides with silicone. It will be imported in one-meter-wide rolls and slit to width after importation. The material will be principally used to wrap wire and cable to provide thermal insulation for high temperature applications. The applicable subheading for the silicone coated woven fiberglass will be 3921.90.4090, Harmonized Tariff Schedule of the United States (HTSUS), which provides for other plates, sheets, film, foil and strip, of plastics: other: other:…
N315057 · 2020-10-30 — The tariff classification of composite sheets of aluminum foil and plastic from Japan
The subject merchandise is a sheet constructed of five layers bonded together with adhesives. The product consists of a layer of polyethylene terephthalate, an oriented nylon film layer, a soft aluminum foil layer with a hydrocarbon resin surface treatment, an acid modified polypropylene layer and a polypropylene layer. The thickness and the weight of the plastics far exceed the thickness and weight of the aluminum. The sheet will be imported on rolls in widths of 200 millimeters (mm), 266 mm and 400 mm. The sheet will be used in the manufacture of lithium-ion battery pouches, which protect…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product