Blockboard, laminboard and battenboard: — Other, with at least one outer ply of nonconiferous wood:
Part of: 4412 — Plywood, veneered panels and similar laminated wood:
N362347 · 2026-06-26 — The tariff classification and country of origin of multilayered wood flooring
Product information and images were submitted for our review. The product under consideration is multilayer wood flooring. The flooring consists of three layers of wood. The face veneer measures 3.5mm in thickness and consists of red oak, white oak, or hard maple, all nonconiferous woods. The core consists of blocks of red pine, SPF, or linden measuring 13.5mm in thickness. The back ply consists of a 2mm-thick layer of eucalyptus or linden, also nonconiferous woods. The grain of each layer runs at a 90-degree angle to that of the adjacent layers. The panels are tongued and grooved on their…
N348114 · 2025-05-08 — The tariff classification of multilayer wood flooring from Thailand
Product information and a sample were submitted for our review. The product under consideration is a multilayer wood flooring panel. The flooring panel is constructed of 3 wood plies. The face ply, measuring 3.8mm in thickness, consists of a continuous sheet of white oak (Quercus spp., a non-coniferous wood) wood veneer. The center ply, measuring approximately 9mm in thickness, consists of blocks of spruce (Picea spp., a coniferous wood) wood. The back ply, measuring approximately 2mm in thickness, consists of radiata pine (Pinus radiata, a coniferous wood) veneer. The grain of the center ply…
N347607 · 2025-04-15 — The tariff classification of multilayer wood flooring panels from the Czech Republic
The ruling was requested on multilayer wood flooring panels. Product information and photos were submitted for our review. The product under consideration is a multilayer wood flooring panel. The flooring panel is constructed of 3 wood plies. The face ply, measuring less than 4mm in thickness, consists of a continuous sheet of Oak (Quercus spp., a non-coniferous wood) wood veneer. The center ply, measuring approximately 10mm in thickness, consists of strips of spruce (Picea spp., a coniferous wood) wood. The back ply, measuring approximately 1mm in thickness, consists of spruce veneer. The…
N345094 · 2025-02-06 — The tariff classification of multilayer wood flooring panels from Indonesia
The ruling was requested on multilayer wood flooring panels. Product information and a sample were submitted for our review. The product under consideration is a multilayer wood flooring panel. The flooring panel is constructed of 3 wood plies. The face ply measuring approximately 3 millimeter in thickness consists of a continuous sheet of Oak (Quercus spp., a non-coniferous wood) wood veneer. The center ply measuring approximately 8 millimeter in thickness consists of strips of Pine (Pinus spp., a coniferous wood) wood. The back ply measuring approximately 3 millimeter in thickness consists…
N341191 · 2024-07-25 — The tariff classification of multilayer wood panels from China
The ruling was requested on two multilayer wood panels. A sample and product information were submitted for our review. There are two products under consideration. One product was represented with a sample. The sample provided measures 18mm in thickness and is constructed of seven wood layers. The core consists of 14mm-thick paulownia (a non-coniferous wood) edge-glued lumber. On both sides of the core, there are three poplar (a non-coniferous wood) veneers. The three veneers measure 0.5mm, 1mm, and 0.5mm in thickness. The grain of each layer runs at an angle to that of the consecutive…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product