Plywood, veneered panels and similar laminated wood:
Part of: 44 — Wood and articles of wood; wood charcoal
N363390 · 2026-07-31 — The tariff classification of multilayer wood flooring from Indonesia
Product information and images were submitted for our review. The products under consideration are three styles of engineered – or multilayer – wood flooring. Style 1 is constructed of multiple layers of Mahogany, Gmelina, or Acacia, all tropical woods. The image shows seven layers of wood and you indicate that no layer exceeds 2.5mm in thickness. The grain of each layer runs at a 90-degree angle to the adjacent layers. The panel is overlaid with a layer of melamine-impregnated, printed paper, and the back of the panel is covered with irradiated cross-linked polyethylene (IXPE) foam. Both the…
N363306 · 2026-07-21 — The tariff classification of multilayer wood flooring from Vietnam
Product information and samples were submitted for our review. The products under consideration are three styles of engineered - or multilayer - wood flooring. The first measures approximately 190mm wide by 300mm long by 15mm in thickness and has a face ply measuring 4.22mm in thickness. This panel is not surface coated. The second panel measures approximately 240mm wide by 300mm long by 15mm in thickness and has a face ply measuring 3.85mm in thickness. This panel is surface coated with a material that does not obscure the grain of the face ply. The third panel measures approximately 190mm…
N362347 · 2026-06-26 — The tariff classification and country of origin of multilayered wood flooring
Product information and images were submitted for our review. The product under consideration is multilayer wood flooring. The flooring consists of three layers of wood. The face veneer measures 3.5mm in thickness and consists of red oak, white oak, or hard maple, all nonconiferous woods. The core consists of blocks of red pine, SPF, or linden measuring 13.5mm in thickness. The back ply consists of a 2mm-thick layer of eucalyptus or linden, also nonconiferous woods. The grain of each layer runs at a 90-degree angle to that of the adjacent layers. The panels are tongued and grooved on their…
N359963 · 2026-04-16 — The classification of melamine- and HDF-overlaid plywood from Indonesia
Product information and a sample were provided for our review. The product under consideration is approximately 19mm in thickness. The panel is constructed of plywood consisting of jabon, gmelina, and racuk (padauk) (all tropical woods). The panel consists of seven veneers, none of which exceeds 6mm in thickness, and the grains of which run at 90-degree angles to the adjacent veneers. The plywood has been overlaid on both face and back with a 2mm-thick sheet of HDF and a layer of opaque melamine-impregnated paper. You indicate that the face ply cannot be identified because, as the wood’s…
N359403 · 2026-03-25 — The classification of phenolic film-faced and medium density overlay plywood from Ghana
Product information and a sample were provided for our review. The product under consideration is approximately 18mm in thickness. The plywood consists of 11 veneers of wood laminated together with the grain of each layer running at a 90-degree angle to the grains of the adjacent layers. No ply exceeds 6mm in thickness. The face and back plies are constructed of gmelina wood (Gmelina arborea, a tropical wood) and the core is constructed of gmelina and eucalyptus woods. The sample provided is covered on one outer ply with a phenolic film and is covered on the other outer ply with MDO, or paper…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product