Other plywood consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm in thickness: — With at least one outer ply of tropical wood:
Part of: 4412 — Plywood, veneered panels and similar laminated wood:
N363390 · 2026-07-31 — The tariff classification of multilayer wood flooring from Indonesia
Product information and images were submitted for our review. The products under consideration are three styles of engineered – or multilayer – wood flooring. Style 1 is constructed of multiple layers of Mahogany, Gmelina, or Acacia, all tropical woods. The image shows seven layers of wood and you indicate that no layer exceeds 2.5mm in thickness. The grain of each layer runs at a 90-degree angle to the adjacent layers. The panel is overlaid with a layer of melamine-impregnated, printed paper, and the back of the panel is covered with irradiated cross-linked polyethylene (IXPE) foam. Both the…
N359963 · 2026-04-16 — The classification of melamine- and HDF-overlaid plywood from Indonesia
Product information and a sample were provided for our review. The product under consideration is approximately 19mm in thickness. The panel is constructed of plywood consisting of jabon, gmelina, and racuk (padauk) (all tropical woods). The panel consists of seven veneers, none of which exceeds 6mm in thickness, and the grains of which run at 90-degree angles to the adjacent veneers. The plywood has been overlaid on both face and back with a 2mm-thick sheet of HDF and a layer of opaque melamine-impregnated paper. You indicate that the face ply cannot be identified because, as the wood’s…
N359403 · 2026-03-25 — The classification of phenolic film-faced and medium density overlay plywood from Ghana
Product information and a sample were provided for our review. The product under consideration is approximately 18mm in thickness. The plywood consists of 11 veneers of wood laminated together with the grain of each layer running at a 90-degree angle to the grains of the adjacent layers. No ply exceeds 6mm in thickness. The face and back plies are constructed of gmelina wood (Gmelina arborea, a tropical wood) and the core is constructed of gmelina and eucalyptus woods. The sample provided is covered on one outer ply with a phenolic film and is covered on the other outer ply with MDO, or paper…
N357197 · 2026-01-15 — The tariff classification of wood products from multiple countries
The request was returned to you for additional information, which was received by this office on December 19, 2025. The ruling addressed medium density fiberboard (MDF) and plywood components that will be imported for the manufacture of cabinet parts. Product information and photos were submitted for our review. The first product under consideration is MDF sheets. The sheets are rectangular and not worked with any shaping, edge-banding, drilling or other manufacturing. The fiberboard consists of wood fiber processed by the dry manufacturing process, where dry fiber is mixed with resin and…
N310002 · 2020-03-13 — The tariff classification of multilayer wood panels from Indonesia
The ruling was requested on multilayer wood panels. A sample was submitted for our review and will be retained for reference. This ruling concerns the classification of a laminated, multilayer wood panel consisting of plywood, medium density fiberboard (MDF) cross-plies, birch veneer, and a printed paper overlay. The panels measure approximately 4’ wide x 8’ long x 12.7mm in thickness. The center three plies consist of falcata (Albizia spp.), rubberwood (Hevea spp.) – both tropical woods - or a mixture of the two. Each ply measures approximately 2mm-3mm in thickness. The plies are laminated…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product