Other: — Other
N363390 · 2026-07-31 — The tariff classification of multilayer wood flooring from Indonesia
Product information and images were submitted for our review. The products under consideration are three styles of engineered – or multilayer – wood flooring. Style 1 is constructed of multiple layers of Mahogany, Gmelina, or Acacia, all tropical woods. The image shows seven layers of wood and you indicate that no layer exceeds 2.5mm in thickness. The grain of each layer runs at a 90-degree angle to the adjacent layers. The panel is overlaid with a layer of melamine-impregnated, printed paper, and the back of the panel is covered with irradiated cross-linked polyethylene (IXPE) foam. Both the…
N359963 · 2026-04-16 — The classification of melamine- and HDF-overlaid plywood from Indonesia
Product information and a sample were provided for our review. The product under consideration is approximately 19mm in thickness. The panel is constructed of plywood consisting of jabon, gmelina, and racuk (padauk) (all tropical woods). The panel consists of seven veneers, none of which exceeds 6mm in thickness, and the grains of which run at 90-degree angles to the adjacent veneers. The plywood has been overlaid on both face and back with a 2mm-thick sheet of HDF and a layer of opaque melamine-impregnated paper. You indicate that the face ply cannot be identified because, as the wood’s…
N359403 · 2026-03-25 — The classification of phenolic film-faced and medium density overlay plywood from Ghana
Product information and a sample were provided for our review. The product under consideration is approximately 18mm in thickness. The plywood consists of 11 veneers of wood laminated together with the grain of each layer running at a 90-degree angle to the grains of the adjacent layers. No ply exceeds 6mm in thickness. The face and back plies are constructed of gmelina wood (Gmelina arborea, a tropical wood) and the core is constructed of gmelina and eucalyptus woods. The sample provided is covered on one outer ply with a phenolic film and is covered on the other outer ply with MDO, or paper…
N329872 · 2023-01-03 — The tariff classification of multiple multilayer wood panels from Malaysia
The ruling was requested on four multilayer wood panels. Product information and samples were submitted for our review. Item 1 is an 18mm-thick plywood panel that is overlaid on its face and back with melamine-impregnated paper. The panel measures 4 feet wide by 8 feet long and the paper is either white or printed with a wood grain. The panel is constructed of 13 wood layers or plies, none of which exceeds 6mm in thickness. The grain of each layer runs at a 90-degree angle to the successive layers. The wood layers all consist of sengon (falcata) wood (Albiza falcataria) or rubberwood (Hevea…
N323260 · 2022-01-12 — The tariff classification of multilayer wood panels from China
The ruling was requested on multiple multilayer wood panels. Photos and product information were submitted for our review. Item 1 is a panel measuring 4 feet wide by 8 feet long by 4.7mm thick and is constructed of five wood layers or plies, none of which exceeds 6mm in thickness. The face and back plies consist of pencil cedar (Palaquium spp., a nonconiferous wood). The grain of each layer runs at a 90-degree angle to the successive layers. You state that the panels are used as a wall covering. Item 2 is a panel identical to Item 1, except that there is a thin, opaque, printed paper overlay…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product