Not surface covered, or surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply: — Other: — Other
N329872 · 2023-01-03 — The tariff classification of multiple multilayer wood panels from Malaysia
The ruling was requested on four multilayer wood panels. Product information and samples were submitted for our review. Item 1 is an 18mm-thick plywood panel that is overlaid on its face and back with melamine-impregnated paper. The panel measures 4 feet wide by 8 feet long and the paper is either white or printed with a wood grain. The panel is constructed of 13 wood layers or plies, none of which exceeds 6mm in thickness. The grain of each layer runs at a 90-degree angle to the successive layers. The wood layers all consist of sengon (falcata) wood (Albiza falcataria) or rubberwood (Hevea…
N323260 · 2022-01-12 — The tariff classification of multilayer wood panels from China
The ruling was requested on multiple multilayer wood panels. Photos and product information were submitted for our review. Item 1 is a panel measuring 4 feet wide by 8 feet long by 4.7mm thick and is constructed of five wood layers or plies, none of which exceeds 6mm in thickness. The face and back plies consist of pencil cedar (Palaquium spp., a nonconiferous wood). The grain of each layer runs at a 90-degree angle to the successive layers. You state that the panels are used as a wall covering. Item 2 is a panel identical to Item 1, except that there is a thin, opaque, printed paper overlay…
N323236 · 2022-01-11 — The tariff classification of wood flooring products imported from Paraguay
The ruling was requested on multiple wood flooring products. Photos and product information were submitted for our review. Item 1 is solid wood flooring panels consisting of Ipe (Tabebuia impetiginosa) wood. Ipe is a tropical wood as designated in The Explanatory Notes to the Harmonized System (ENs) for heading 4421. The panels measure approximately 1 foot to 7 feet in length, 2 1/4 inches to 5 inches in width, and 3/4 inch in thickness. They are tongued and grooved on all edges and ends and have two lengthwise grooves on the panel back. The panels may be stained or unstained, and are…
N305249 · 2019-08-08 — The tariff classification of plywood from Vietnam
The request was returned to you for additional information, which was received by this office on July 10, 2019. A sample was submitted for our review and will be retained for reference. In your request, you seek the classification of plywood with one outer ply of Bintangor, a tropical wood, and one outer ply of birch, a non-tropical, non-coniferous wood. Neither outer ply is surface covered. The core is comprised of acacia veneers. The representative sample is approximately 18mm thick, and consists of 13 veneer layers, none exceeding 6mm in thickness. The grain of each layer runs at a…
N297087 · 2018-06-15 — The tariff classification of plywood panels from India
The request was returned to you for additional information, which was received by this office on May 16, 2018. The ruling was requested on two plywood products. Samples were submitted for our review and will be returned to you, as requested. The samples will be returned under separate cover. The first panel consists of an 11-layer plywood constructed of Hevea brasiliensis (“rubber wood”) veneers. In your first submission, you stated that the face ply of the panel consists of Keruing, Okoume, or “White Face Veneer”. In your second submission, you state that the face ply is Hevea. No ply…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product