Granules
Part of: 7205 — Granules and powders, of pig iron, spiegeleisen, iron or steel:
N351301 · 2025-07-23 — The tariff classification of steel grit from China
The products under consideration are nonalloy (carbon) steel and stainless steel grit used to manufacture Microtracers® that are designed to assure the quality of mixed formula animal, poultry, and fish feed. In an email to this office, you provided sieve analyses of the two products you purchase and indicated that both types of grit have particle sizes between 0.1 mm and 0.4 mm. Powders, which include steel powders, are defined in Section XV, Note 8(b) of the Harmonized Tariff Schedule of the United States (HTSUS) as “Products of which 90 percent or more by weight passes through a sieve…
N292031 · 2018-03-19 — The tariff classification of iron granules from Japan
A sample was submitted with your request and sent to the Customs Laboratory for analysis. The products under consideration, identified as Iron Compound YEI-010, consist of iron, polytetra butylene terephthalate and butylene/poly (alkylene ether) phthalate. The iron predominates by weight over the other two components. Based on advice from the lab, the products are iron granules as defined in Chapter 72, Note 1(h). The applicable subheading for the iron granules will be 7205.10.0000, Harmonized Tariff Schedule of the United States (HTSUS), which provides for granules and powders, of pig iron,…
N245551 · 2014-04-16 — The tariff classification of iron or steel granules from China.
A representative sample was included with your ruling request. The product to be imported is described as a compound consisting of iron powder, Polyamide 12 and a polyether block amide. You indicate that this compound will be used in the manufacture of magnetic holding devices. The submitted sample was sent to our laboratory for analysis. As per laboratory analysis, the product consists of iron or steel cylinders in metallic form with a polymer resin. The iron or steel component makes up 72 percent of the sample by weight. The cylinders measure approximately two millimeters in diameter and…
R00980 · 2004-11-17 — The tariff classification of steel shot from India and South Korea.
The products to be imported are carbon (nonalloy) steel and stainless steel cut wire shot for use as abrasives or in shot peening metal parts. This cut wire shot will range from 0.010 inch (0.254 mm) up to 0.062 inch (1.57 mm) in diameter. Since this steel shot is produced by cutting steel wire into cylindrical shapes, you ask whether it can be classified under HTS heading 7205 which provides for granules and powders of iron or steel. The Explanatory Notes to heading 7205 (A) for granules state that this heading also covers wire pellets produced by cutting iron or steel wire and used for…
K83558 · 2004-03-15 — The tariff classification of black silicon carbide, an abrasive article and stainless steel cut wire from China
L. Fusco, Inc., you requested a tariff classification ruling. Representative samples of the items you wish to import were submitted with your ruling and will be returned to you as requested. In your letter, item number two is identified as “Black Silicon Carbide” - GBS0450. You stated that the article is produced in 16 grit sizes. It will be used in the manufacturing of grinding wheels, the sand blasting of metal products, as a non-slip abrasive for floors, nail files, and to polish stones in the gemology industry. The applicable subheading for the black silicon carbide will be 2849.20.2000,…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product