Containing by weight less than 0.25 percent of carbon: — Of rectangular (including square) cross section, the width measuring less than twice the thickness
Part of: 7207 — Semifinished products of iron or nonalloy steel:
N351850 · 2025-08-12 — The classification of nonalloy steel billets from China
The products to be imported are nonalloy steel billets measuring 3 inches in width x 3 inches in thickness x 12 inches long and contain less than 0.25 percent by weight of carbon. After importation, the billets will be used as a raw material for making steel in foundries. In your request you suggest that the steel billets are classified in subheading 7204.49, Harmonized Tariff Schedule of the United States (HTSUS), which provides for Ferrous waste and scrap; remelting scrap ingots of iron or steel: Other. We disagree. Waste and scrap is defined in Section XV, Note 8(a)(ii) as “Metal goods…
J83742 · 2003-05-18 — The tariff classification of steel billets from China.
The product to be imported is a continuously cast nonalloy steel square billet measuring 70 mm x 70 mm and containing less than 0.25 percent by weight of carbon. After importation you plan to remelt this billet and use it as a melt addition. The applicable subheading for the nonalloy steel billet will be 7207.11.0000, Harmonized Tariff Schedule of the United States (HTS), which provides for semifinished products of iron or nonalloy steel, containing by weight less than 0.25 percent of carbon, of rectangular (including square) cross section, the width measuring less than twice the thickness.…
J81670 · 2003-03-27 — The tariff classification of steel billets from Brazil.
The products to be imported are nonalloy steel billets for the manufacture of amorphous metal ribbon used in the production of electrical transformer cores. According to the chemical composition that was provided, the product will have a maximum carbon content of 0.08%. The products are rolled from ingots to a cross section of 140 mm x 140 mm and lengths ranging from 6400 mm to 7200 mm. After importation the billets are cut into predetermined small square-shaped finished sizes to facilitate remelting. They will be remelted in combination with ferroalloys to produce the required chemistry for…
881770 · 1993-01-22 — The tariff classification of steel billets from Brazil.
The products to be imported are continuous cast steel billets which, after importation, will be reheated and rerolled into wire rods. You state that the following grades of steel billets will be imported: 1008 rimmed, 1010, 10B21 cold heading quality, 1080 tire cord quality, 1566 industrial quality, 1065, 1022 cold heading quality, 1038 cold heading quality and 1144 resulphurized. The applicable subheading for the nonalloy steel billets which contain less than 0.25 percent by weight of carbon will be 7207.11.00, Harmonized Tariff Schedule of the United States (HTS), which provides for…
858051 · 1990-12-12 — The tariff classification of steel plates, bars, flats and billets from Germany.
Each of the items to be imported is of non alloy steel. The plates are hot rolled and have thicknesses ranging from 3 mm to 6 mm, widths from 1000 mm to 1500 mm and lengths from 2000 mm to 3000 mm. The bars are hot rolled with diameters ranging from 8 mm to 240 mm and lengths from 3 m to 12 m. The flats are also hot rolled with thicknesses ranging from 5 mm to 60 mm, widths from 10 mm to 150 mm and lengths from 3 m to 12 m. The billets have dimensions of 60 x 60 mm to 170 x 170 mm and come in varying lengths from 300 mm to 4000 mm. The applicable subheading for the plates with thicknesses of…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product