High-strength steel
N225335 · 2012-08-08 — The tariff classification of flat-rolled nonalloy steel in coils from Russia
The subject of your inquiry is flat-rolled iron or nonalloy steel in coils that has not been further worked than hot-rolled. The product is described in two sizes: first, 2.84 mm thick and 1524 mm wide: second, 6.10 mm thick and 1524 mm wide. The products have each been subjected to the same yield point mechanical tests. The two results for the first product within the same lot were 279 and 273. The two results for the second product were 356 and 342 from two different lots. Mill test certificates have been presented for the products showing them to be manufactured to meet ASTM…
H197758 · 2012-04-27 — Ruling Request; Classification of Hot Rolled Carbon Steel Coils
FACTS: On November 1, 2011, you filed an amended request for a binding ruling concerning the classification of certain hot rolled carbon steel coils. This was an amendment to your original request, filed on September 2, 2011. The merchandise at issue is hot rolled carbon steel in the form of coils or successively superimposed layers, not plated or coated, and imported from Russia in various thicknesses. Data submitted with your requests indicate that the merchandise is imported with a width of 1219 mm, and in thicknesses of 4.50 mm, 6.10 mm, 9.27 mm, and 12.19 mm. The merchandise is sold as…
N032816 · 2008-07-21 — The tariff classification of steel coils from India or China.
The items to be imported consist of hot rolled, non-alloy steel sheets imported in coils. The coils will measure between 1500 and 1650 mm in width. Imported in thicknesses of 9.1 mm, 10.9 mm, 12.7 mm and 13.1 mm, these steel sheets will not be pickled, clad, plated or otherwise coated. The minimum yield point of the sheets is stated to be between 500 and 620 MPa. The applicable subheading for the steel sheet measuring over 10 mm in thickness will be 7208.36.0030, Harmonized Tariff Schedule of the United States (HTSUS), which provides for flat rolled products of iron or nonalloy steel, of a…
I81232 · 2002-05-09 — The tariff classification of flat-rolled steel from Romania.
The product to be imported is hot-rolled flat-rolled nonalloy steel in coil and sheet form. The flat-rolled steel measures 48 inches in width and ranges from 1/8 inch to ½ inch in thickness. You indicate that these products are not pickled. The applicable subheading for the hot-rolled coils exceeding 10 mm in thickness will be 7208.36.00, Harmonized Tariff Schedule of the United States (HTS), which provides for flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated, other, in coils, not further worked than hot-rolled, of a…
b86437 · 1997-07-10 — The tariff classification of steel coils from Serbia.
The products to be imported are Grades 1008 and 1010 carbon steel hot-rolled and cold-rolled coils. The hot-rolled coils are not pickled and measure over 600 mm in width with varying thicknesses up to 10 mm. The cold-rolled coils measure over 600 mm in width and have thicknesses of 0.0359 inch (20 gage)and 0.0179 inch (26 gage). The applicable subheading for the hot-rolled coils which measure from 4.75 mm to 10 mm in thickness will be 7208.37.00, Harmonized Tariff Schedule of the United States (HTS), which provides for flat-rolled products of iron or nonalloy steel, of a width of 600 mm or…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product