High-strength steel
N320953 · 2021-08-12 — The tariff classification of steel sheet from Vietnam
The product under consideration is hot-rolled steel sheet made to ASTM A572/A572M, Grade 50. Imported in coil form, this sheeting is available in three sizes: 3.83 mm X 1360 mm, 4.25 mm X 1360 mm and 4.53 mm X 1360 mm. Based on the information provided, this material has a yield point over 355 MPa and appears to meet the high-strength steel requirements set forth in Chapter 72, Additional U.S. Note 1(a). The applicable subheading for the steel sheet will be 7208.38.0015, Harmonized Tariff Schedule of the United States, (HTSUS), which provides for Flat-rolled products of iron or nonalloy…
N320048 · 2021-06-25 — The tariff classification of steel sheet from Vietnam
The product under consideration is hot-rolled steel sheet meeting EN 10025-2, Grade S275 Jr + Ar. Imported in coil form, this sheeting is available in three sizes: 3.81 mm X 1410 mm, 4.24 mm X 1524 mm and 4.52 mm X 1524 mm. As this material is stated to have a yield point over 355 MPa, it appears to meet the high-strength steel requirements set forth in Chapter 72, Additional U.S. Note 1(a). The applicable subheading for the steel sheet will be 7208.38.0015, Harmonized Tariff Schedule of the United States, (HTSUS), which provides for Flat-rolled products of iron or nonalloy steel, of a width…
H197758 · 2012-04-27 — Ruling Request; Classification of Hot Rolled Carbon Steel Coils
FACTS: On November 1, 2011, you filed an amended request for a binding ruling concerning the classification of certain hot rolled carbon steel coils. This was an amendment to your original request, filed on September 2, 2011. The merchandise at issue is hot rolled carbon steel in the form of coils or successively superimposed layers, not plated or coated, and imported from Russia in various thicknesses. Data submitted with your requests indicate that the merchandise is imported with a width of 1219 mm, and in thicknesses of 4.50 mm, 6.10 mm, 9.27 mm, and 12.19 mm. The merchandise is sold as…
I81232 · 2002-05-09 — The tariff classification of flat-rolled steel from Romania.
The product to be imported is hot-rolled flat-rolled nonalloy steel in coil and sheet form. The flat-rolled steel measures 48 inches in width and ranges from 1/8 inch to ½ inch in thickness. You indicate that these products are not pickled. The applicable subheading for the hot-rolled coils exceeding 10 mm in thickness will be 7208.36.00, Harmonized Tariff Schedule of the United States (HTS), which provides for flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated, other, in coils, not further worked than hot-rolled, of a…
b86437 · 1997-07-10 — The tariff classification of steel coils from Serbia.
The products to be imported are Grades 1008 and 1010 carbon steel hot-rolled and cold-rolled coils. The hot-rolled coils are not pickled and measure over 600 mm in width with varying thicknesses up to 10 mm. The cold-rolled coils measure over 600 mm in width and have thicknesses of 0.0359 inch (20 gage)and 0.0179 inch (26 gage). The applicable subheading for the hot-rolled coils which measure from 4.75 mm to 10 mm in thickness will be 7208.37.00, Harmonized Tariff Schedule of the United States (HTS), which provides for flat-rolled products of iron or nonalloy steel, of a width of 600 mm or…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product