Other: — Other
Part of: 72083900 — Other, in coils, not further worked than hot-rolled: — Of a thickness of less than 3 mm
N235526 · 2012-12-18 — The tariff classification of flat-rolled nonalloy steel in coils from Russia
The items under consideration are flat-rolled nonalloy steel in coils that has not been further worked other than hot-rolled. The products are described in two sizes. The first is a 2.84mm thick X coil, and the second is a 6.10 mm thick X coil. Both are 1524 mm wide, and have been subjected to the same yield point mechanical tests. The yield point test results for the first item were 279 MPa and 273 MPa, tested on the same lot. The results for the second item were 356 MPa and 342 MPa, taken from two different lots. Mill test certificates were submitted for the instant products. The…
N225335 · 2012-08-08 — The tariff classification of flat-rolled nonalloy steel in coils from Russia
The subject of your inquiry is flat-rolled iron or nonalloy steel in coils that has not been further worked than hot-rolled. The product is described in two sizes: first, 2.84 mm thick and 1524 mm wide: second, 6.10 mm thick and 1524 mm wide. The products have each been subjected to the same yield point mechanical tests. The two results for the first product within the same lot were 279 and 273. The two results for the second product were 356 and 342 from two different lots. Mill test certificates have been presented for the products showing them to be manufactured to meet ASTM…
b86437 · 1997-07-10 — The tariff classification of steel coils from Serbia.
The products to be imported are Grades 1008 and 1010 carbon steel hot-rolled and cold-rolled coils. The hot-rolled coils are not pickled and measure over 600 mm in width with varying thicknesses up to 10 mm. The cold-rolled coils measure over 600 mm in width and have thicknesses of 0.0359 inch (20 gage)and 0.0179 inch (26 gage). The applicable subheading for the hot-rolled coils which measure from 4.75 mm to 10 mm in thickness will be 7208.37.00, Harmonized Tariff Schedule of the United States (HTS), which provides for flat-rolled products of iron or nonalloy steel, of a width of 600 mm or…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product