Clad
Part of: 721090 — Other:
966801 · 2004-07-20 — NY I89446 affirmed; classification of clad steel plate
This is in reference to your letter, dated March 31, 2003, to the National Commodity Specialist Division (“NCSD”), New York, requesting reconsideration of New York Ruling Letter (“NY”) I89446, dated January 9, 2003, regarding the classification of clad steel plate, under the Harmonized Tariff Schedule of the United States Annotated (“HTSUSA”). Your letter, together with a laboratory analysis and catalog pages describing and illustrating the plate, was forwarded to this office for reply. FACTS: The merchandise under consideration is clad steel plate. It was described in NY I89446 as follows:…
K82934 · 2004-02-25 — The tariff classification of clad steel wear plate from Canada.
Descriptive literature was submitted with your request. The product to be imported is described as chromium carbide overlay wear plate. This wear plate is a clad plate consisting of a mild steel backing (base) plate onto which a layer of chromium carbide alloy (overlay) is applied. The wear plate is produced in various thicknesses ranging from 3/8 inch to 1 ½ inches. The maximum plate size is 90 inches x 144 inches. You state that in some cases the base plate predominates by weight over the overlay, and in some cases the overlay material predominates by weight over the base plate. The…
J86691 · 2003-08-05 — The tariff classification of clad steel plate from Australia.
The product to be imported, called Vidaplate, consists of a steel substrate or “backing plate” to which a chromium carbide “overlay” plate is fused. Vidaplate is used as wear-resistant liner plates for protecting industrial equipment from high abrasion and erosion. The chemical compositions of both the backing plate and overlay plate are provided. The backing plate may be either nonalloy or alloy steel depending on the manganese, nickel, molybdenum, chromium and/or copper content. Three different grades of overlay plate may be bonded to the backing plate, V31, V34 and V37. A typical chemical…
I89446 · 2003-01-08 — The tariff classification of clad steel plate from Australia.
Ltd., you requested a tariff classification ruling. A representative sample of the product to be imported was submitted with your request. The product to be imported is described as clad plate consisting of a hot-rolled mild steel backing plate to which a chromium carbide alloy is applied by a continuous weld cast technique. Chemical compositions for both the base plate/backing plate and the overlay were provided. The base plate is BHP Grade ASIH25-1954-HA 1006 nonalloy steel. The overlay material contains from 30.0% to 45.0% chromium, 3.8% to 5.5% carbon, a maximum of 3% of manganese and…
I82635 · 2002-06-24 — The tariff classification of clad steel plate from Germany.
, you requested a tariff classification ruling. The product to be imported is clad steel cut plate of a width exceeding 600 mm. The substrate is hot-rolled, pickled and polished carbon steel plate that has been clad with Nicrofer 5923 hMo–alloy 59, a nickel alloy material. The clad plate conforms to the requirements of ASTM Specification A 265, the Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate. The applicable subheading for the nickel-clad steel plate will be 7210.90.1000, Harmonized Tariff Schedule of the United States (HTS), which provides for flat-rolled products…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product