Of a width of less than 300 mm
Part of: 721240 — Painted, varnished or coated with plastics:
N298283 · 2018-07-24 — The tariff classification of steel strapping from Russia
The product to be imported is cold-rolled nonalloy steel strapping with a carbon content ranging from 0.14% to 0.18 %. This strapping, which is used for transporting and fastening packages, will be imported in coils of successively superimposed layers or spirally oscillated coils with thicknesses ranging from 0.40 mm to 1.30 mm and widths ranging from 12.7 mm to 31.75 mm. You indicate that the strapping will be either oxidized and waxed or oxidized, painted and waxed. Steel strapping imported in coils of successively superimposed layers meets the definition of flat-rolled products in Chapter…
N297323 · 2018-06-21 — The tariff classification of paint test panels from Belgium
A representative sample was included with your submission and will be retained by this office. The products to be imported are paint test panels used in the automotive refinishing industry. These nonalloy steel rectangular shaped panels, which measure 152.40 mm (L) x 95 mm (W), have rounded corners and are coated on both sides with plastic. They also include five painted squares along the top on one side and a drill hole. You indicate that the body shop sprays the test panels with paint prior to painting an automobile to ensure that the color is accurate. The applicable subheading for the…
N262711 · 2015-04-10 — The tariff classification of tinplate from Japan
The product under consideration is tinplate, carbon steel sheet that is electrolytically coated with tin. Imported in coils, the sheet has a thickness of .27 mm and a width ranging from 177.8 mm to 232.05 mm. The sheet will be laminated on one side with polypropylene (PP) or polyethylene terephthalate (PET) and coated with lacquer on the other side. However, you indicate that some tinplate will just be laminated on both sides. The applicable subheading for the tinplate that has been laminated and coated with lacquer will be 7212.40.1000, Harmonized Tariff Schedule of the United States…
N011822 · 2007-05-29 — The tariff classification of various laminated steel products from Germany.
This letter replaces New York Ruling N009974 which you recently received. In reviewing that letter a clerical error in the description of the laminated steel sheet was identified. That error has been corrected in the text below. In your letter dated April 17, 2007, on behalf of Rasselstein GmbH, you requested a tariff classification ruling. The products to be imported are variations of electrolytic tinplate and electrolytic chromium coated steel that have been either laminated with plastic foil or laminated and then lacquered with epoxiphenole. All products are in coil form with thicknesses…
M84656 · 2006-07-13 — The tariff classification of steel strapping from China.
Representative samples were submitted with your request. The products be imported are two types of cold-rolled carbon steel strapping. The first item is imported in spirally oscillated coils and has a carbon content of 0.11-0.17%. This strapping will measure .020” (.508 mm) in thickness and is available in widths of ½”, 5/8” or ¾”. This product will be painted black and waxed. The second item is imported in coils of successively superimposed layers (ribbon wound) and has a carbon content of 0.20 - 0.35 %. This particular strapping is available in only two sizes, measuring either 1 ¼ “ (32 mm)…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product