7214 91 00 90

Code

7214 91 00 90

Type

10-digit tariff line

Duty rate

Free (set at subheading 72149100)

Unit

kg

Classification rulings (U.S. Customs, CROSS)

• I82814 · 2002-07-01 — The tariff classification of steel bars and angles from Turkey.

  The products to be imported are hot-rolled nonalloy steel flat bars, round bars, square bars and angles. These products are made to ASTM Specification A 36 which is the Standard Specification for Carbon Structural Steel. Some typical dimensions of the flat bars are 1/8 inch x ½ inch, 3/16 inch x 1 inch and ¼ inch x ¾ inch. The rounds range in size from ¼ inch to 5/8 inch and the squares from 3/8 inch to 5/8 inch. Some typical dimensions of the angles are ¾ inch x ¾ inch x 1/8 inch and 1 ¼ inch x 1 ¼ inch x 1/8 inch. The applicable subheading for the hot-rolled nonalloy steel flat bars will be…

• g87398 · 2001-03-18 — The tariff classification of steel bars from various European countries.

  The products to be imported are carbon steel hot–rolled rectangular flat bars, hot-rolled square bars, cold drawn square bars and cold drawn round bars. The hot-rolled rectangular flat bars come in a wide range of sizes, e.g. 3 mm x 10 mm; 3 mm x 150 mm; 10 mm x 60 mm; 20 mm x 80 mm; 40 mm x 60 mm; 40 mm x 250 mm. The hot-rolled square bars range in size from 5 mm to 150 mm. The cold drawn square and round bars will also be imported in various sizes. Flat-rolled products are defined in Chapter 72 Note 1. (k) as “Rolled products of solid rectangular (other than square) cross section…in the…

• E81572 · 1999-06-04 — The tariff classification and status under the North American Free Trade Agreement (NAFTA), of steel plate from Canada; Article 509

  , you requested a ruling on the status of steel plate from Canada under the NAFTA. Hot-rolled flat-rolled nonalloy steel plates ranging from 0.5 inch to 16 inches in thickness, from 40 inches to 80 inches in width and from 120 inches to 160 inches in length are produced in various European countries and imported into Canada. These hot-rolled nonalloy steel plates are classified under heading 7208, Harmonized Tariff Schedule of the United States (HTSUS). In Canada, the hot-rolled plates, which will be used in the production of mold bases and parts of dies for metal stamping machines, undergo…

• 7214 91 00 16 — Containing by weight less than 0.25 percent of carbon: — With a maximum cross section less than 152 mm
• 7214 91 00 20 — Containing by weight less than 0.25 percent of carbon: — With a maximum cross section of 152 mm or more
• 7214 91 00 60 — Containing by weight 0.25 percent or more but less than 0.6 percent of carbon

• 721491 — ТН ВЭД ЕАЭС: прямоугольного (кроме квадратного) поперечного сечения:
• 721491 — EU CN/TARIC: Other — Of rectangular (other than square) cross-section

Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.