Other: — Other wire
Part of: 721710 — Not plated or coated, whether or not polished:
N306149 · 2019-09-16 — The tariff classification of steel wire from Japan
The products under consideration are five styles of SR08B tapered profile edged wire. Imported in coil form, this hard drawn nonalloy steel wire will have a carbon content ranging from of .59% to .66 %. Differentiated by size, the various styles are as follows: Part #AFZ11282 (thickness 2.680 mm – 2.700 mm, width 1.220 mm – 1.240 mm); Part #AFZ11273 (thickness 2.705 mm – 2.735 mm, width 1.030 mm - 1.045 mm); Part #AFZ11265 (thickness 2.905 mm – 2.935 mm, width 1.220 mm – 1.240 mm); Part # AFZ11201 (thickness 2.685 mm – 2.715 mm, width 1.020 mm – 1.040 mm); and Part #AFZ11252 (thickness 2.705…
J87549 · 2003-08-18 — The tariff classification of clicker die steel from Austria.
Representative sample of the products to be imported were submitted with your request. The product to be imported is known as clicker die steel. The clicker die steel is hardened and tempered cold-rolled nonalloy strip steel having a carbon content ranging from 0.52% to 60% by weight. It ranges from 19 mm to 50 mm in width, from 2 mm to 4 mm in thickness and will be imported in coils of successively superimposed layers. The clicker die steel has several different cross sectional configurations or profiles that are achieved by rolling and then grinding. The various profiles have the following…
d82346 · 1998-09-23 — The tariff classification of profile and non-profile stripfrom Germany.
The subject products are profile and non-profile strip which are further described as follows: A) Profile strip in the dimensions of: 1.78mm (thickness), 0.94mm (thickness in the grooved area), 22.22mm (width). B) Profile strip in the dimensions of: 2.10mm (thickness), 1.10mm (thickness in the grooved area), 16.0mm (width). Products A and B are used to produce channel rods for textile weaving looms. Both of these products are made from unalloyed steel with a carbon content of about 0.60%. They are cold rolled and the profile/indentation and radiused edges are produced by the rolling process.…
a84156 · 1996-06-27 — The tariff classification of wire from France.
The item you describe is coiled steel wire which has a cross section that has two opposing flattened sides measuring 5/16 of an inch and two opposing curved sides measuring 1/8 of an inch. The wire is uniform through out its length and varies in thickness and carbon content. You state that the product is produced by passing wire rod through dies in a cold-formed process. You also state that the wire may be galvanized or coated with another base metal. You have enclosed a sample of a window wiper arm which the wire will be used to produce once it is imported. Your uncoated wire which contains…
a82753 · 1996-05-23 — The tariff classification of steel ski edges from Austria.
The item you describe,is an "L" shaped item, approximately 5/16 inch in width, imported in coils and made of non-alloy steel which contains by weight more than .6 percent carbon. You state that the item is produced by passing steel wire through three roller dies and after importation the material is cut to lengths and used as edges for skis. The material in its imported state is cold formed and is of a uniform cross section through out its length. You state in your letter that this item should be classified as an angle or shape and section of non alloy steel under Harmonized Tariff Schedule…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product