Of high-nickel alloy steel
Part of: 72192100 — Not further worked than hot-rolled, not in coils: — Of a thickness exceeding 10 mm
N305985 · 2019-09-23 — The tariff classification of nickel alloy plate from Japan
The merchandise in question is described as SuperAlloy UNSN08120. Based on the information provided, this hot-rolled, annealed nickel alloy product will be imported in plate form measuring 1750 mm in length, 1750 mm in width and 56 mm in thickness and as a test coupon measuring 600 mm in length, 35 mm in width and 56 mm in thickness. The UNSN08120 chemistry indicates that this metal’s composition is primarily one of nickel, iron and chromium with either the nickel or iron content predominating by weight. Although you indicate that the subject products will have a nickel content which exceeds…
N176158 · 2011-08-14 — The tariff classification of stainless steel plate from Japan.
The products to be imported are cut to length hot-rolled steel plates meeting ASTM Specification A 240, the Standard Specification for Chromium and Chromium–Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications. Made to UNS Designations N08810 and N08811, these particular stainless steels meet the Chapter 72, Statistical Note 1 definition of high-nickel alloy steel. The plates will measure 3/8” (9.52 mm) to 2” (50.8 mm) in thickness and 60” (1524 mm) to 78.75” (2000.25 mm) in width. They will be imported with a No. 1 unpolished, or rolled, finish.…
N176568 · 2011-08-14 — The tariff classification of plate from Japan.
The products to be imported are cut to length hot-rolled plates meeting ASTM Specification A 240, the Standard Specification for Chromium and Chromium–Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications. Made to UNS Designation N08020, the exact chemistry of the merchandise is unknown. Depending upon whether it is the iron or nickel which predominates by weight, these plates will be classified in Chapters 72 or 75 respectively. Measuring 3/8” (9.52 mm) to 2” (50.8 mm) in thickness and 60” (1524 mm) to 78.75” (2000.25 mm) in width, the plates are…
h88628 · 2002-03-10 — The tariff classification of flat-rolled stainless steel from Canada.
The products to be imported are cut-to-length hot-rolled stainless steel plates of a thickness exceeding 10 mm. The products will be imported in widths of 600 mm or more and in widths of less than 600 mm. The applicable subheading for the hot-rolled stainless steel plates measuring 600 mm or more in width will be 7219.21.00, Harmonized Tariff Schedule of the United States (HTS), which provides for flat-rolled products of stainless steel, of a width of 600 mm or more, not further worked than hot-rolled, not in coils, of a thickness exceeding 10 mm. The general rate of duty will be 1.9 percent…
g86763 · 2001-02-28 — The tariff classification of stainless steel bars and plates from various European countries.
The products to be imported are Types 304, 304L, 316 and 316L stainless steel hot-rolled flat bars and hot-rolled cut-to-length plates. The hot-rolled rectangular flat bars range in size from 3 mm x 20 mm to 12 mm x 150 mm. The plates measure 1250 mm x 2500 mm and 1500 mm x 3000 mm and range from 6 mm to 45 mm in thickness. Flat-rolled products are defined in Chapter 72 Note 1.(k) as “Rolled products of solid rectangular (other than square) cross section…in the form of…straight lengths, which if of a thickness less than 4.75 mm are of a width measuring at least 10 times the thickness or if of…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product