7219 33 00 44

Code

7219 33 00 44

Type

10-digit tariff line

Duty rate

Free (set at subheading 72193300)

Unit

kg

Classification rulings (U.S. Customs, CROSS)

• M85730 · 2006-08-29 — The tariff classification of stainless steel sheet from China.

  The product to be imported is Type 430 stainless steel cold-rolled sheet. Measuring 2 mm in thickness and 4 ft (1219.2 mm) in width, this material is available in either coil form or cut to lengths of 4 or 8 ft. In a telephone conversation with this office you stated that the sampled material contained 0.08 percent nickel. The applicable subheading for the sheet in coils will be 7219.33.0044, Harmonized Tariff Schedule of the United States (HTSUS), which provides for flat-rolled products of stainless steel, of a width of 600 mm or more, not further worked than cold-rolled (cold reduced), of a…

• h84171 · 2001-08-09 — The tariff classification and country of origin of cold-rolled flat-rolled stainless steel produced from hot-rolled stainless steel coils from various countries, including France, Spain, Japan, Korea, Taiwan and South Africa.

  You also ask about the country of origin of the product that is imported into the United States. The products to be imported are cold-rolled flat-rolled stainless steel products in coil and cut-to-length form. These flat-rolled products range from 50 mm to 1219 mm in width and from 0.25 mm to 2.0 mm in thickness. Some of the products will have a No. 2B or No. 2D unpolished cold-rolled finish and some will have a No. 3 or No. 4 polished finish. The applicable subheading for the cold-rolled flat-rolled stainless steel products measuring 600 mm or more in width and measuring over 1 mm but less…

• 7219 33 00 05 — In coils: — Of a width of 1370 mm or more: — Of high-nickel alloy steel
• 7219 33 00 20 — In coils: — Of a width of 1370 mm or more: — Other: — Containing more than 0.5 percent by weight of nickel
• 7219 33 00 25 — In coils: — Of a width of 1370 mm or more: — Other: — Other
• 7219 33 00 35 — In coils: — Other: — Of high-nickel alloy steel
• 7219 33 00 36 — In coils: — Other: — Other: — Containing more than 0.5 percent by weight of nickel: — Containing more than 1.5 percent but less than 5 percent by weight of…
• 7219 33 00 38 — In coils: — Other: — Other: — Containing more than 0.5 percent by weight of nickel: — Other
• 7219 33 00 42 — In coils: — Other: — Other: — Other: — Containing less than 15 percent by weight of chromium
• 7219 33 00 45 — Not in coils: — Of a width of 1370 mm or more
• 7219 33 00 70 — Not in coils: — Other: — Containing more than 0.5 percent but less than 24 percent by weight of nickel
• 7219 33 00 80 — Not in coils: — Other: — Other

• 721933 — ТН ВЭД ЕАЭС: толщиной более 1 мм, но менее 3 мм
• 721933 — EU CN/TARIC: Not further worked than cold-rolled (cold-reduced) — Of a thickness exceeding 1 mm but less than 3 mm

Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.