Not in coils
N275902 · 2016-06-17 — The tariff classification of stainless steel sheets from Taiwan
The products you intend to import are described as cold rolled stainless steel sheets originating in Taiwan as coils and then exported to China for further processing. In China the coils are polished, slit into sheets, backed with a PVC protective covering, cut to length and packaged for export to the U.S. It is noted that the slitting operation described is simply cutting to width and length and not to a defined shape or pattern. The sheets are made to ASTM A240, grades 304 and 430 specifications which are high chromium stainless steel grades. Nickel in these specifications range from a…
N275903 · 2016-06-17 — The tariff classification of cold rolled stainless steel sheet from Korea
The products you intend to import are described as cold rolled stainless steel sheets originating in Korea as coils and then exported to China for further processing. In China the coils are polished, slit into sheets, backed with a PVC covering to protect the finish, cut to length and packaged for export to the U.S. It is noted that the slitting operation described is simply cutting to width and length and not to a defined shape or pattern. The sheets are made to ASTM A240, grades 304 and 430 specifications which are high chromium stainless steel grades. Nickel in these specifications range…
I84865 · 2002-08-25 — The tariff classification of stainless steel sheet from Sweden.
The product to be imported is Type 304 and Type 316 stainless steel cold-rolled quench annealed sheet measuring 2250 mm in length, 1000 mm in width and ranging from 0.4 mm to 0.8 mm in thickness. This flat-rolled sheet will ultimately be used in the manufacture of heat exchangers. This stainless steel sheet, in its imported condition, meets the definition for flat-rolled products in HTS Chapter 72 Note 1. (k): “Rolled products of solid rectangular (other than square) cross section…in the form of…straight lengths, which if of a thickness less than 4.75 mm are of a width measuring at least 10…
I81231 · 2002-05-16 — The tariff classification of stainless steel sheets from Taiwan.
The products to be imported are Type 304 stainless steel sheets made to ASTM Specifications A 240 and A 480. ASTM Spec A 240 is the Standard Specification for Heat-Resisting Chromium and Chromium–Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels. ASTM Spec A 480 is the Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip. The products range from approximately 0.5 mm to 3 mm in thickness and measure either 48 inches or 60 inches in width. These sheets have either a No. 2B finish, which is a cold-rolled…
800469 · 1994-08-23 — The tariff classification of stainless steel sheet, a product of Japan
(America). The material under review is a stainless steel sheet, cold rolled, AISI Type 304 with a bright annealed finish manufactured in Japan. The sheets are cut to either 4 feet by 10 feet or 4 feet by 8 feet. The sheets range in thickness from 0.8 mm to 3.0 mm. The cut sheets are shipped to Singapore where they are dipped in an acid liquid to produce an oxide film in various colors. The stainless steel sheets are mainly used in the construction of doors, interior and exterior panels, elevators and kitchen surfaces, and in household goods such as kitchen appliances, freezers and vending…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product