Not further worked than hot-rolled: — Of a thickness of 4.75 mm or more
Part of: 7220 — Flat-rolled products of stainless steel, of a width of less than 600 mm:
N275246 · 2016-05-27 — The tariff classification of steel plate from Japan
The products you intend to import are described as steel plate which has been hot rolled directly into flat plate and is not in coil form at any time during the processing. The plates are further described as being produced to random lengths with the intent that your customers will further process them to the desired lengths. According to your submission, the plates must be cut or worked in the U.S. before final sale in order to be used. The dimensions of the plate is stated to be between 28mm and 135mm in thickness; between 410mm and 610mm in width; and, between 2 meters and 3.6 meters in…
N153417 · 2011-03-29 — The tariff classification of stainless steel flat bars from Taiwan.
The products to be imported are described as Type 304L stainless steel flat bars. Cut from hot-rolled plate, these 12 foot bars will have thickness ranging from .1875 inch (4.76 mm) to .500 inch (12.7 mm) and widths of 1.25 inches (31.75 mm) to 10 inches (254 mm). Flat-rolled products are defined in Chapter 72, Note 1 (k) as “Rolled products of solid rectangular (other than square) cross section…in the form of…straight lengths,…if of a thickness of 4.75 mm or more are of a width which exceeds 150 mm and measures at least twice the thickness”. Depending upon the exact measurement of each the…
h88628 · 2002-03-10 — The tariff classification of flat-rolled stainless steel from Canada.
The products to be imported are cut-to-length hot-rolled stainless steel plates of a thickness exceeding 10 mm. The products will be imported in widths of 600 mm or more and in widths of less than 600 mm. The applicable subheading for the hot-rolled stainless steel plates measuring 600 mm or more in width will be 7219.21.00, Harmonized Tariff Schedule of the United States (HTS), which provides for flat-rolled products of stainless steel, of a width of 600 mm or more, not further worked than hot-rolled, not in coils, of a thickness exceeding 10 mm. The general rate of duty will be 1.9 percent…
E80676 · 1999-05-10 — The tariff classification of stainless and alloy steel plate from Germany, Austria and Japan.
, you requested a tariff classification ruling. The products to be imported are described as stainless steel mold plate material and NAK 55 manifold material. Stainless steel mold plate material DIN 1.2316, DIN 1.2085 and Royalloy meet the definition of stainless steel in Chapter 72 Note 1.(e). NAK 55 manifold material meets the definition of other alloy steel in Chapter 72 Note 1.(f). The DIN 1.2316, DIN 1.2085 and Royalloy stainless steel material will be produced in thicknesses ranging from 37 mm to 257 mm, in widths ranging from 410 mm to 1247 mm and in random lengths ranging from 2500 mm…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product