Containing more than 0.5 percent but less than 24 percent by weight of nickel: — Other
Part of: 72209000 — Other
N354071 · 2025-10-02 — The tariff classification and applicability of Section 232 additional duties of stainless steel coils
The products under consideration are Type 304 stainless steel coils made to ASTM A240. These cold-rolled, annealed coils have a thickness of .0495 inch (1.25 mm), a width 13.21 inches (335.53 mm), and have a PVC coating on one side. The coils will ultimately be used to make step rails for pickup trucks. You suggest classification of the subject coils in subheading 7220.20.1015, Harmonized Tariff Schedule of the United States (HTSUS), which provides for Flat-rolled products of stainless steel, of a width of less than 600 mm: Not further worked than cold-rolled (cold-reduced): Of a width of 300…
N331969 · 2023-04-19 — The tariff classification of stainless steel shims from Slovenia
The products under consideration are described as stainless steel shims and identified as Piller item numbers 10421510 and 10147656. According to your submission, the shims are used to align the bearing box assembly to the fan casing in your Piller fans. Item number 10421510 is hot-rolled, cut to a rectangular size, and includes two, pre-drilled holes. The shim measures 640 mm (length) x 170 mm (width) x 18 mm (thickness). Flat-rolled products are defined in Chapter 72, Note 1(k) as “Rolled products of solid rectangular (other than square) cross section…in the form of…straight lengths, which…
N193199 · 2011-12-08 — The tariff classification and country of origin of embossed stainless steel foil.
The item in question is embossed stainless steel foil. Manufactured in Italy, foil measuring from .007”-.008” in thickness is sent to Germany for embossing. Here, the foil is pulled between two rollers and is deformed resulting in a stucco embossment pattern. Imported to the United States in roll form, the embossed foil measures 400 mm in width and .17 mm in thickness. The "country of origin" is defined in 19 CFR 134.1(b) as "the country of manufacture, production, or growth of any article of foreign origin entering the United States. Further work or material added to an article in another…
N006458 · 2007-02-23 — The tariff classification of metal coils from Japan and Germany.
You plan to import two types of metal products ultimately used as decorative foils in the automotive industry. The first item is type 304 stainless steel sheet measuring 0.2 mm in thickness, either 344.8 mm or 379.8 mm in width and imported in coils. This product is lacquered with an acrylic adhesive on one side and is covered with a blue film on the other side, which protects its brightly annealed finish during transport. The second item is an aluminum foil which has been lacquered on one side with an epoxy urea substance and on the other side with an acrylic adhesive. Imported in coils,…
h87071 · 2002-02-04 — The tariff classification of copper plated stainless steel from Korea.
and SK Global America, Inc., you requested a tariff classification ruling. Descriptive literature and a representative sample of the product to be imported were submitted with your request. The product to be imported is electrolytic copper-plated flat-rolled stainless steel marketed under the name “SUSCOP”. The substrate, Type 304 cold-rolled stainless steel, is coated with two layers, a nickel layer and a copper layer on the surface. SUSCOP flat-rolled steel ranges from 0.30 mm to 1.00 mm in thickness and up to 1000 mm in width. It will be imported either in coil form or in lengths ranging…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product