Other: — Other: — Containing 8 percent or more but less than 24 percent by weight of nickel
Part of: 72221900 — Bars and rods, not further worked than hot-rolled, hot-drawn or extruded: — Other
N340521 · 2024-06-24 — The tariff classification of stainless steel flat bars from India
The products under consideration are Type 316L stainless steel flat bars containing between 10% - 14% nickel. These hot-rolled, annealed, pickled bars will be imported in thicknesses ranging from 5 mm - 30 mm, widths of 20 mm - 150 mm, and lengths of 12 feet - 22 feet. You state that the bars can be used in various applications (i.e., automotive, appliances, industrial products, structural, etc.). Flat-rolled products are defined in Chapter 72, Note 1(k) of the Harmonized Tariff Schedule of the United States (HTSUS) as “Rolled products of solid rectangular (other than square) cross section…in…
N340522 · 2024-06-24 — The tariff classification of stainless steel flat bars from India
The products to be imported are Type 317L stainless steel flat bars containing between 11% - 15% nickel. These hot-rolled, annealed, pickled bars will have a thickness of 15 mm, a width of 20 mm, and lengths ranging from 12 feet - 22 feet. You state that the bars can be used in various applications (i.e., automotive, appliances, industrial products, structural, etc.). Flat-rolled products are defined in Chapter 72, Note 1(k) of the Harmonized Tariff Schedule of the United States (HTSUS) as “Rolled products of solid rectangular (other than square) cross section…in the form of…straight lengths,…
N340519 · 2024-06-24 — The tariff classification of stainless steel flat bars from India
The products under consideration are Type 304L stainless steel flat bars containing between 8% - 11% nickel. These hot-rolled, annealed, pickled bars will be imported in thicknesses ranging from 5 mm - 30 mm, widths of 20 mm - 150 mm, and lengths of 12 feet - 22 feet. You state that the flat bars are used in various applications (i.e., automotive, appliances, industrial products, structural, etc.). Flat-rolled products are defined in Chapter 72, Note 1(k) of the Harmonized Tariff Schedule of the United States (HTSUS) as “Rolled products of solid rectangular (other than square) cross…
h88628 · 2002-03-10 — The tariff classification of flat-rolled stainless steel from Canada.
The products to be imported are cut-to-length hot-rolled stainless steel plates of a thickness exceeding 10 mm. The products will be imported in widths of 600 mm or more and in widths of less than 600 mm. The applicable subheading for the hot-rolled stainless steel plates measuring 600 mm or more in width will be 7219.21.00, Harmonized Tariff Schedule of the United States (HTS), which provides for flat-rolled products of stainless steel, of a width of 600 mm or more, not further worked than hot-rolled, not in coils, of a thickness exceeding 10 mm. The general rate of duty will be 1.9 percent…
g86763 · 2001-02-28 — The tariff classification of stainless steel bars and plates from various European countries.
The products to be imported are Types 304, 304L, 316 and 316L stainless steel hot-rolled flat bars and hot-rolled cut-to-length plates. The hot-rolled rectangular flat bars range in size from 3 mm x 20 mm to 12 mm x 150 mm. The plates measure 1250 mm x 2500 mm and 1500 mm x 3000 mm and range from 6 mm to 45 mm in thickness. Flat-rolled products are defined in Chapter 72 Note 1.(k) as “Rolled products of solid rectangular (other than square) cross section…in the form of…straight lengths, which if of a thickness less than 4.75 mm are of a width measuring at least 10 times the thickness or if of…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product