Electroslag or vacuum arc remelted
Part of: 72222000 — Bars and rods, not further worked than cold-formed or cold-finished
N340744 · 2024-06-28 — The tariff classification of stainless steel round bars from Taiwan
The products under consideration are types 303, 304L, and 316L stainless steel hot-rolled electroslag remelted bars and cold-finished electroslag remelted bars. According to your submission, these cut-to-length bars will be imported in diameters of 5/16” (7.87 mm), 32 mm, and 2-1/2” (63.5 mm) and have not been coated/painted, drilled, punched or notched. The applicable subheading for the hot-rolled stainless steel round bars will be 7222.11.0001, Harmonized Tariff Schedule of the United States (HTSUS), which provides for Other bars and rods of stainless steel; angles, shapes and sections of…
N314570 · 2020-09-29 — The tariff classification of various steel bars from China, Ukraine or Slovenia
The products in question are various cold-finished round bars. According to your submission, these bars will be imported in stainless steel grades 440C and 420 ESR and alloy steel grades L6 and Cru501. Although each of these steels are referred to as tool steel in the furnished spec sheets, they do not meet the chemical requirements of a tool steel as defined in Chapter 72, Additional U.S. Note 1(e). You indicate that the stainless steel bars will have a diameter of either 12.70 mm or 101.60 mm, while the alloy bars will measure either 50.80 mm or 101.60 mm. In addition, you state that both…
N299512 · 2018-08-27 — The tariff classification of stainless steel bars from Germany
The products to be imported are type 316L stainless steel electroslag remelted bars. These round bars, made to ASTM F138 and ISO 5832-1 standards, will be produced in diameters ranging from 9.978 - 10.0 mm. Based on the information provided, after remelting, the steel is first hot-worked to either billet or rod-coil form and then cold-worked to approach final dimensions, impart the desired mechanical properties (tensile strength, yield strength, elongation) and achieve a bright finish. These bars are subsequently centerless ground to produce a closer diameter tolerance and a smoother surface…
K89814 · 2004-10-26 — The tariff classification of metal shafts, metal shafts with machining, shaft rail assemblies, linear motion systems and a Dixie-elevator dispenser from Mexico
The articles in question are metal shafts, metal shafts with machining, shaft rail assemblies, linear motion systems and a Dixie-elevator dispenser. Descriptive information was submitted. The metal shafts are solid or lightweight tubular straight circular rods made of bearing-quality, high carbon alloy or 440C, 440EH (extra hard) and 300 series stainless steel materials. The shafts are hardened and precision-ground and have chamfered ends. Various types of plating are available for coating the high carbon steel products. The shafts are machined to antifriction bearing specifications and…
967226 · 2004-07-28 — Clarification of HQ 966562 regarding Stainless Steel Grid Wires Used in Multifunctional Digital Copier Units,
On March 4, 2004, Customs and Border Protection (CBP) issued HQ 966562, to you, which concerns the classification of two stainless steel grid wires used in multifunctional digital copier units under the Harmonized Tariff Schedule of the United States (HTSUS). CBP classified one grid wire, Part # AD02-0001, in subheading 7222.20.00, HTSUS as “Other bars and rods of stainless steel; angles, shapes and sections of stainless steel: Bars and rods, not further worked than cold-formed or cold finished.” The second grid wire, Part # ADO23-9006 was classified in subheading 8473.30.50, HTSUS as “Parts…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product