Other
Part of: 722240 — Angles, shapes and sections:
N068862 · 2009-08-13 — The tariff classification of stainless steel posts, beams and rungs from China
The items you plan to import are stainless steel posts, cross beams and individual rungs for fencing. The posts and cross beams or rails are punched with slots. The individual rungs are crimped to form a point at the top. All parts are stainless steel having a wall thickness of less than 4 mm. Pictures of the prospective items were attached. You indicated in subsequent phone conversations that the method of production is cold rolling and that the products are welded. The posts and cross beams or rails are both a U channel shape having three sides. The rungs are rectangular in shape having…
N068356 · 2009-08-09 — The tariff classification of mustache rails from Germany
The item you propose to import is called a mustache rail. The mustache rail is described as a stainless steel profile, 129 inches in length, 4 inches in width, and 2 inches in height. It is cold formed from stainless steel sheet and is in the shape of an upside down u curve at time of importation. After importation a flat piece of stainless steel is welded to the bottom of the mustache rail so that it forms a rod like shape with a u curve. The finished rod is used to slide the heat exchanger plates along to build the heat exchanger. You propose classification in 7222.20.0075, Harmonized…
I84841 · 2002-08-18 — The tariff classification of stainless steel angles from Japan.
Representative samples of the products to be imported were submitted with your request. The products to be imported are described as stainless steel cold-finished sharp-edge equal-leg angles. These angles, which are cold-rolled, range in size from ¾ inch to 4 inches. The applicable subheading for the cold-rolled/cold-finished stainless steel angles will be 7222.40.6000, Harmonized Tariff Schedule of the United States (HTS), which provides for other bars and rods of stainless steel; angles, shapes and sections of stainless steel, angles, shapes and sections, other. The rate of duty will be 1.1…
I83803 · 2002-07-18 — The tariff classification of stainless steel profile shapes from Austria.
A sample was submitted with your request. The products to be imported from Austria into the United States are cold-formed stainless steel profile shapes (slide rails) in straight 3-meter lengths. These profile shapes have a cross-sectional configuration in the shape of a modified “U”. The applicable subheading for the cold-formed stainless steel profile shapes in straight lengths will be 7222.40.6000, Harmonized Tariff Schedule of the United States (HTS), which provides for angles, shapes and sections of stainless steel, angles, shapes and sections, other. The rate of duty will be 1.1 percent…
i80238 · 2002-04-25 — The tariff classification of steel profile material from Germany.
The products to be imported are stainless steel profile shapes. Drawings depicting the cross-sectional shapes of three different profiles were submitted with your request. The profiles are designated by the following numbers: 5172, 66273 and 66274. You state that these profile shapes are produced by hot-extruding and/or cold-drawing and will ultimately be used in the manufacture of gas turbine propeller spacers. These profile shapes will be imported in material lengths. After importation, they will be cut to the length required by the customer. Additional processing such as cutting or…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product