Other: — Cold-formed
Part of: 722860 — Other bars and rods:
N339722 · 2024-05-07 — The tariff classification of steel wire and rod from Luxembourg
The products under consideration are vineyard wire (product codes C46D and C36D+B) and pencil rods (product code C7DSI). The wire is made of either nonalloy or alloy steel and is cold-drawn, galvanized, and lacquered. It is made to ASTM 510 and is imported in coils with diameters of 2.03, 2.5, and 2.6 mm. The alloy steel pencil rods are cold-drawn, galvanized and ribbed by cold deformation. They are made to ASTM 510 and are imported in cut-to-length bundles. The diameter of the rods is 6 mm. The applicable subheading for the nonalloy steel vineyard wire will be 7217.90.1000, Harmonized Tariff…
N307065 · 2019-11-12 — The tariff classification of steel bars from Italy
The products to be imported, identified as 12.8L and 14.8L Engine Exhaust axles, are cut-to-length cold-drawn steel bars which will ultimately be used in diesel engines. Comprised of carbon (0.42% – 0.5%), silicon (max 0.4%), manganese (0.5% – 0.8%), nickel (max 0.4%), phosphorous (0.03%), sulfur (max 0.035%), chromium (max 0.4%) and molybdenum (max 0.1%), these bars measure 36.2 mm in diameter, have chamfered ends and a 7 mm drill hole on one end. After importation, the “axles” will undergo considerable further working such as drilling, deburring, case hardening, straightening, centerless…
N304361 · 2019-06-14 — The tariff classification of steel products from the United Kingdom
, you requested a tariff classification ruling. Representative photos were included with your request. The items under consideration are identified as “Rough Forgings”, “Semifinished Products” and “Finished Products”. Each of these goods is comprised of alloy steel and is said to represent die keys at different stages of manufacture. The “Rough Forgings” are produced in a two-stage forging operation. According to the information provided, an ingot is first forged into a usable billet, cut to the proper forge weight and subsequently forged into a “Rough Forging”. Imported in material lengths,…
N266324 · 2015-07-28 — The tariff classification of bars/rods from Taiwan
The products under consideration are rectangular blocks that will ultimately be made into parts used in oil drilling equipment. The blocks are made from alloy steel and meet the Chapter 72, Note 1(m) definition for other bars and rods. The bars/rods measure approximately 42.75” (L) X 20.37” (W) X 24” (H) and have been hot forged, quenched, tempered, milled (cold-formed) and will contain drill holes. You suggest classification of the bars/rods in subheading 7228.40.0000, Harmonized Tariff Schedule of the United States (HTSUS), which provides for other bars and rods of other alloy steel, other…
N239538 · 2013-04-09 — The tariff classification of round solid bars from China
Descriptive literature, pictorial representations and mill test reports were submitted. The products to be imported are described as round solid alloy steel bars approximately 31 feet in length and ranging in outside diameter from 4 inches to 11.25 inches. You describe these bars as manufactured by hot continuous casting, cold rolled and heat treated. Mill certificates show the material complying with API specification 7-1. After importation they will be further processed into drill collars, pup joints, lift subs and other items used in drilling operations in the oil and gas industry. In your…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product