73045980

Code

73045980

Type

heading / subheading

Duty rate

Free

Tariff lines inside

14

Units of quantity

kg (14)

Classification rulings (U.S. Customs, CROSS)

• H306406 · 2020-01-28 — Request for binding ruling on the classification of steel coupling stock

  , for a binding ruling on the classification of steel coupling stock. FACTS: The product under consideration is described as hot-rolled seamless steel pipe, made to specification API (American Petroleum Institute) 5CT. It comes in grades L80 type 1, L80 type 13Cr, T95, P110, C110, or Q125. The outside diameter is 2.750 inches to 16.500 inches with a wall thickness of 0.400 inches to 2.5 inches. Its usage is defined as “mechanical tube” for accessory material and “coupling stock”. The ultimate purchasers of the instant merchandise in the U.S. then further process the coupling stock to…

• N308568 · 2020-01-17 — The tariff classification of seamless alloy steel tubes from Germany

  The products under consideration are described as unfinished perforated gun carriers which are components of perforating gun assemblies. These hot-rolled, seamless alloy steel tubes are imported in 12, 14, 16, 18 and 23 foot lengths. The tubes have outside diameters ranging from 2.75 inches (69.85 mm) to 7 inches (177.8 mm) and wall thicknesses ranging from 0.312 inches (7.92 mm) to 0.500 inches (12.70 mm). You proposed classification for the subject unfinished perforated gun carriers under heading 7326, Harmonized Tariff Schedule of the United States (HTSUS), which provides for other…

• b89609 · 1997-10-08 — The tariff classification of steel coupling stock from Germany.

  The product to be imported is coupling stock, a seamless tubular product of either carbon or alloy steel used for the manufacture of pipe couplings. The coupling stock will be imported in various outside diameters and wall thicknesses in API Grades K-55 and higher in accordance with API Specification 5CT for Casing and Tubing. Several representative mill test certificates were submitted with your ruling request. The applicable subheading for the seamless carbon or nonalloy steel coupling stock will be 7304.39.00, Harmonized Tariff Schedule of the United States (HTS), which provides for tubes,…

• 854023 · 1990-07-23 — The tariff classification of hollow bars of high-speed alloy steel from Sweden.

  The products to be imported are hollow bars of high-speed alloy steel. These bars, which conform to ASTM A600-89, Grade M2 specifications, will be in varying lengths up to 2 meters. The outside diameter will range between 100-240 MM and the inside diameters will fall between 18.4-65 MM. These bars will ultimately be used for cam rings. The applicable subheading for hollow bars of high-speed alloy steel will be 7304.59.80 Harmonized Tariff Schedule of the United States (HTS), which provides for tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel, other, of…

• 084670 · 1989-09-22 — Seamless tubes of alloy steel in cut lengths for individual automotive door impact beams

  In a letter of May 24, 1989, you request a ruling on the classification of cut lengths of tubing which are to be used, after additional processing, as impact beams for side collision protection in automobiles. This merchandise, in material lengths, was the subject of a ruling under the former tariff schedules (letter dated November 12, 1987, file 080953). This decision is the subject of a complaint filed with the Court of International Trade (Case No. 88-07-00540). You now ask for a ruling on cut lengths of this tubing. FACTS: The merchandise is seamless mechanical tubing of alloy steel…

• 7304 59 80 10 — Having an outside diameter less than 38.1 mm
• 7304 59 80 15 — Having an outside diameter of 38.1 mm or more but not exceeding 114.3 mm: — Having a wall thickness less than 6.4 mm
• 7304 59 80 20 — Having an outside diameter of 38.1 mm or more but not exceeding 114.3 mm: — Having a wall thickness of 6.4 mm or more but not exceeding 12.7 mm
• 7304 59 80 25 — Having an outside diameter of 38.1 mm or more but not exceeding 114.3 mm: — Having a wall thickness exceeding 12.7 mm
• 7304 59 80 30 — Having an outside diameter exceeding 114.3 mm but less than 190.5 mm: — Having a wall thickness less than 12.7 mm
• 7304 59 80 35 — Having an outside diameter exceeding 114.3 mm but less than 190.5 mm: — Having a wall thickness of 12.7 mm or more but less than 19 mm
• 7304 59 80 40 — Having an outside diameter exceeding 114.3 mm but less than 190.5 mm: — Having a wall thickness of 19 mm or more
• 7304 59 80 45 — Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mm: — Having a wall thickness less than 12.7 mm
• 7304 59 80 50 — Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mm: — Having a wall thickness of 12.7 mm or more but less than 19 mm
• 7304 59 80 55 — Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mm: — Having a wall thickness of 19 mm or more
• 7304 59 80 60 — Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm: — Having a wall thickness less than 12.7 mm
• 7304 59 80 65 — Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm: — Having a wall thickness of 12.7 mm or more but less than 19 mm
• 7304 59 80 70 — Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm: — Having a wall thickness of 19 mm or more
• 7304 59 80 80 — Having an outside diameter exceeding 406.4 mm

• 730459 — ТН ВЭД ЕАЭС: прочие
• 730459 — EU CN/TARIC: Other, of circular cross-section, of other alloy steel — Other

Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.