7304 59 80 80

Code

7304 59 80 80

Type

10-digit tariff line

Duty rate

Free (set at subheading 73045980)

Unit

kg

Classification rulings (U.S. Customs, CROSS)

• H306406 · 2020-01-28 — Request for binding ruling on the classification of steel coupling stock

  , for a binding ruling on the classification of steel coupling stock. FACTS: The product under consideration is described as hot-rolled seamless steel pipe, made to specification API (American Petroleum Institute) 5CT. It comes in grades L80 type 1, L80 type 13Cr, T95, P110, C110, or Q125. The outside diameter is 2.750 inches to 16.500 inches with a wall thickness of 0.400 inches to 2.5 inches. Its usage is defined as “mechanical tube” for accessory material and “coupling stock”. The ultimate purchasers of the instant merchandise in the U.S. then further process the coupling stock to…

• N247681 · 2013-12-05 — The tariff classification of bored bar from China

  You have submitted descriptive literature, pictorial representations and a mill certificate. The items in question are bored bars that are heat treated, quenched and tempered. The hollow bars are fully bored along the entire length. The bars measure 18inches (457.2 mm) outside diameter by 14 inches (355.6 mm) inside diameter and 15 inches (381 mm) outside diameter by 12 inches (304.8 mm) inside diameter. The bars are 142 inches in length. These alloyed bored bars are made to ASTM A29 and ASTM A322 standards. The applicable subheading for the steel alloy bored bars with an outside diameter of…

• N088216 · 2010-01-15 — The tariff classification of hollow alloy steel bars from China

  The item which your client intends to import are described as forged alloy steel bars with the following dimensions: outside diameter – 17.0 inches (432 mm); inside diameter – 7.0 inches (179 mm); and, length 3.0 feet (914 mm). The specification of the material is AISI 4130 as shown on the mill certificate. The constituent elements and percentages as shown on the mill certificate are consistent with the requirements for other alloy steel in Chapter 72, Note 1(f) Harmonized Tariff Schedule of the United States (HTSUS). These bars were originally milled in China and imported into the United…

• b89609 · 1997-10-08 — The tariff classification of steel coupling stock from Germany.

  The product to be imported is coupling stock, a seamless tubular product of either carbon or alloy steel used for the manufacture of pipe couplings. The coupling stock will be imported in various outside diameters and wall thicknesses in API Grades K-55 and higher in accordance with API Specification 5CT for Casing and Tubing. Several representative mill test certificates were submitted with your ruling request. The applicable subheading for the seamless carbon or nonalloy steel coupling stock will be 7304.39.00, Harmonized Tariff Schedule of the United States (HTS), which provides for tubes,…

• 854023 · 1990-07-23 — The tariff classification of hollow bars of high-speed alloy steel from Sweden.

  The products to be imported are hollow bars of high-speed alloy steel. These bars, which conform to ASTM A600-89, Grade M2 specifications, will be in varying lengths up to 2 meters. The outside diameter will range between 100-240 MM and the inside diameters will fall between 18.4-65 MM. These bars will ultimately be used for cam rings. The applicable subheading for hollow bars of high-speed alloy steel will be 7304.59.80 Harmonized Tariff Schedule of the United States (HTS), which provides for tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel, other, of…

• 7304 59 80 10 — Having an outside diameter less than 38.1 mm
• 7304 59 80 15 — Having an outside diameter of 38.1 mm or more but not exceeding 114.3 mm: — Having a wall thickness less than 6.4 mm
• 7304 59 80 20 — Having an outside diameter of 38.1 mm or more but not exceeding 114.3 mm: — Having a wall thickness of 6.4 mm or more but not exceeding 12.7 mm
• 7304 59 80 25 — Having an outside diameter of 38.1 mm or more but not exceeding 114.3 mm: — Having a wall thickness exceeding 12.7 mm
• 7304 59 80 30 — Having an outside diameter exceeding 114.3 mm but less than 190.5 mm: — Having a wall thickness less than 12.7 mm
• 7304 59 80 35 — Having an outside diameter exceeding 114.3 mm but less than 190.5 mm: — Having a wall thickness of 12.7 mm or more but less than 19 mm
• 7304 59 80 40 — Having an outside diameter exceeding 114.3 mm but less than 190.5 mm: — Having a wall thickness of 19 mm or more
• 7304 59 80 45 — Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mm: — Having a wall thickness less than 12.7 mm
• 7304 59 80 50 — Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mm: — Having a wall thickness of 12.7 mm or more but less than 19 mm
• 7304 59 80 55 — Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mm: — Having a wall thickness of 19 mm or more
• 7304 59 80 60 — Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm: — Having a wall thickness less than 12.7 mm
• 7304 59 80 65 — Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm: — Having a wall thickness of 12.7 mm or more but less than 19 mm
• 7304 59 80 70 — Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm: — Having a wall thickness of 19 mm or more

• 730459 — ТН ВЭД ЕАЭС: прочие
• 730459 — EU CN/TARIC: Other, of circular cross-section, of other alloy steel — Other

Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.