7306 30 50 10

Code

7306 30 50 10

Type

10-digit tariff line

Duty rate

Free (set at subheading 73063050)

Unit

kg

Classification rulings (U.S. Customs, CROSS)

• H309804 · 2020-08-22 — Application for Further Review of Protest No. 4601-20-108134; Classification of downrods for ceiling fans

  The following is our decision regarding the Application for Further Review (“AFR”) of Protest No. 4601-20-108134, timely filed by Thomas L. Jarvis on behalf of LG Sourcing Inc. or (“Protestant”). The Protest pertains to the tariff classification of ceiling fan downrods, which the protestant entered under subheading 8414.90.10 of the Harmonized Tariff Schedule of the United States (“HTSUS”). The subject merchandise was entered by protestant on January 9, 2019. On November 8, 2019, CBP liquidated the entry under subheading 7306.30.50, HTSUS, which provides for “Other tubes, pipes and hollow…

• N050715 · 2009-03-03 — The tariff classification and country of origin determination of steel pipe from Korea

  , you requested a tariff classification ruling. The items which are the subject of your inquiry are described as pipe nipples longer than 12 inches in length made in China from pre-cut Korean pipe. The originating pipe from Korea sent to China is described as ERW (Electric Resistance Welded) steel pipe made to ASTM A53 Grade A standards in galvanized and black finishes. The originating material is plain end and in lengths of 6.4 meters. Subsequent information requested by us and received from you indicates that the pipe is cut and threaded in China into lengths of 14 inches to 72 inches and…

• 966927 · 2004-06-21 — Steel pipe, tapered pipes and pipe fittings that are used in concrete pumping equipment; NY J8873 affirmed

  The National Commodity Specialist Division of U.S. Customs and Border Protection, (CBP), New York, forwarded your letter with its attachments to the Office of Regulations and Rulings for a decision on your request for reconsideration. FACTS: Esser Twin Pipes imports parts for Original Equipment Manufacturers (OEMs) of concrete pumps in the United States. You indicate that more than 98 percent of Esser’s sales consists of four main articles that are used with concrete pumps. These articles are twin straight length wall pipes, twin wall reducers, twin wall bends, and twin wall flanges of…

• J88733 · 2003-10-15 — The tariff classification of steel pipes and fittings from Germany.

  Descriptive literature was submitted with your request. The products to be imported are straight lengths of steel pipe, tapered pipe (reducers) and pipe fittings (bends). These products, known as TWIN PIPES, consist of two layers, an inner layer of carbon steel (similar to Grade 1045 steel) and an outer layer of alloy steel. It appears that the inner layer of carbon steel predominates by weight. The inner and outer layers/tubes are produced separately; the inner tube is inserted into the outer tube, heated and then quenched with water. This causes the outer tube to shrink and bind itself…

• c84507 · 1998-02-25 — The tariff classification of steel tubes from Mexico.

  A. DE C.V., you requested a tariff classification ruling. The products to be imported are electric resistance welded (ERW) carbon steel tubes made to ASTM Specification A 178, the Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler Tubes. The tubes measure 2 inches in outside diameter and 0.095 inch in wall thickness. The applicable tariff provision for the ERW carbon steel boiler tubes will be 7306.30.5010, Harmonized Tariff Schedule of the United States Annotated (HTSUSA), which provides for other tubes, pipes and hollow profiles (for…

• 7306 30 50 15 — Other, cold-drawn
• 7306 30 50 20 — Other, cold-rolled (cold-reduced) with a wall thickness not exceeding 2.54 mm
• 7306 30 50 26 — Other: — With an outside diameter not exceeding 114.3 mm: — Galvanized: — Imported with coupling: — With an outside diameter not exceeding 50.8 mm
• 7306 30 50 27 — Other: — With an outside diameter not exceeding 114.3 mm: — Galvanized: — Imported with coupling: — With an outside diameter exceeding 50.8 mm but not…
• 7306 30 50 28 — Other: — With an outside diameter not exceeding 114.3 mm: — Galvanized: — Internally coated or lined with a non-electrically insulating material, suitable for…
• 7306 30 50 31 — Other: — With an outside diameter not exceeding 114.3 mm: — Galvanized: — Other: — With an outside diameter not exceeding 50.8 mm
• 7306 30 50 33 — Other: — With an outside diameter not exceeding 114.3 mm: — Galvanized: — Other: — With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mm
• 7306 30 50 35 — Other: — With an outside diameter not exceeding 114.3 mm: — Other: — Tube and pipe hollows for redrawing
• 7306 30 50 41 — Other: — With an outside diameter not exceeding 114.3 mm: — Other: — Imported with coupling: — With an outside diameter not exceeding 50.8 mm
• 7306 30 50 43 — Other: — With an outside diameter not exceeding 114.3 mm: — Other: — Imported with coupling: — With an outside diameter exceeding 50.8 mm but not exceeding…
• 7306 30 50 56 — Other: — With an outside diameter not exceeding 114.3 mm: — Other: — Other: — With an outside diameter not exceeding 50.8 mm
• 7306 30 50 57 — Other: — With an outside diameter not exceeding 114.3 mm: — Other: — Other: — With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mm
• 7306 30 50 85 — Other: — With an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm: — Galvanized
• 7306 30 50 90 — Other: — With an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm: — Other

• 73063 — ТН ВЭД ЕАЭС: прочие сварные, круглого поперечного сечения, из железа или нелегированной стали
• 730630 — EU CN/TARIC: Other, welded, of circular cross-section, of iron or non-alloy steel

Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.