7306 30 50 15

Code

7306 30 50 15

Type

10-digit tariff line

Duty rate

Free (set at subheading 73063050)

Unit

kg

Classification rulings (U.S. Customs, CROSS)

• N317557 · 2021-03-09 — The tariff classification of a camshaft rod from Mexico

  The product under consideration is described a finished camshaft rod with narrow dimensional tolerances. You state that this cold-drawn, welded tube is manufactured from alloy steel. However, based on the chemical composition provided, the tube is made from nonalloy (carbon) steel. The manufacturing process results in a tube with chamfered ends and a wall thickness of 1.65 mm or more. The oil rings, oil holes, and hex flats will be added to the tube after importation. Classification of merchandise under the Harmonized Tariff Schedule of the United States (HTSUS) is made in accordance with the…

• N316635 · 2021-01-19 — The tariff classification of a nonalloy steel cylinder body from Italy

  The product under consideration, identified as item 122220413, is a raw cylinder body for use in hydraulic cylinders for agricultural tractors. According to your submission, this cold-drawn nonalloy steel welded tube is made to European Standard 10305-2 E355 C. The tube, which has an outside diameter of 53 mm and a wall thickness of 4 mm, is cut-to-length, drilled to make the first oil hole and then deburred. After importation, the tube undergoes the following processes: machining, welding of oil ports, washing and preparation for assembly as a finished hydraulic cylinder. The applicable…

• N316238 · 2020-12-22 — The tariff classification of nonalloy steel tubes from Switzerland

  The products under consideration are five nonalloy steel tubes for automotive prop shafts. These cold-drawn, welded, circular steel tubes are made to European Standard EN 10305-2. The tubes are machined, cut and swaged and will be imported in lengths ranging from 400 mm to 900 mm. According to your submission, the first tube has a maximum wall thickness of 1.64 mm and an outside diameter of 54 mm. The second tube measures 1.7 mm in wall thickness with an outside diameter of 80 mm. The third tube has a wall thickness of 1.5 mm and an outside diameter of 50 mm. The fourth tube measures 2.5 mm…

• N299103 · 2018-08-17 — The tariff classification of automotive steering tubes from South Korea

  The products to be imported are described as automotive steering telescopic tubes, Part numbers 48865 H09J0-T, 48865 H09K0-T and 48863 126J0-T. These nonalloy steel Electric Resistance Welded (ERW) tubes are cold-drawn, annealed, straightened, cut-to-size and then chamfered. They have wall thicknesses of approximately 3.75 mm or more and are available in lengths ranging from approximately 163.5 mm to 215.4 mm. You state that the tubes are designed to be used with another tube (not included in this request) in which the inner tube slides inside the outer tube. When assembled with other parts,…

• N299104 · 2018-08-17 — The tariff classification of automotive steering tubes from South Korea

  The products to be imported are described as automotive steering column tubes, Part numbers 25032696, 25034029, 25034599, 25034636 and 25035798. These nonalloy steel Electric Resistance Welded (ERW) tubes are cold-drawn over a mandrel (DOM), annealed, straightened, cut-to-size and then chamfered. They have wall thicknesses of approximately 5.7 mm and are available in lengths ranging from approximately 45.4 mm to 259.18 mm. Four of the tubes are round with the exception of Part number 25034599 which is in the shape of a hexagon. The tubes are used in the shaft assembly of automobile steering…

• 7306 30 50 10 — Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold drawn
• 7306 30 50 20 — Other, cold-rolled (cold-reduced) with a wall thickness not exceeding 2.54 mm
• 7306 30 50 26 — Other: — With an outside diameter not exceeding 114.3 mm: — Galvanized: — Imported with coupling: — With an outside diameter not exceeding 50.8 mm
• 7306 30 50 27 — Other: — With an outside diameter not exceeding 114.3 mm: — Galvanized: — Imported with coupling: — With an outside diameter exceeding 50.8 mm but not…
• 7306 30 50 28 — Other: — With an outside diameter not exceeding 114.3 mm: — Galvanized: — Internally coated or lined with a non-electrically insulating material, suitable for…
• 7306 30 50 31 — Other: — With an outside diameter not exceeding 114.3 mm: — Galvanized: — Other: — With an outside diameter not exceeding 50.8 mm
• 7306 30 50 33 — Other: — With an outside diameter not exceeding 114.3 mm: — Galvanized: — Other: — With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mm
• 7306 30 50 35 — Other: — With an outside diameter not exceeding 114.3 mm: — Other: — Tube and pipe hollows for redrawing
• 7306 30 50 41 — Other: — With an outside diameter not exceeding 114.3 mm: — Other: — Imported with coupling: — With an outside diameter not exceeding 50.8 mm
• 7306 30 50 43 — Other: — With an outside diameter not exceeding 114.3 mm: — Other: — Imported with coupling: — With an outside diameter exceeding 50.8 mm but not exceeding…
• 7306 30 50 56 — Other: — With an outside diameter not exceeding 114.3 mm: — Other: — Other: — With an outside diameter not exceeding 50.8 mm
• 7306 30 50 57 — Other: — With an outside diameter not exceeding 114.3 mm: — Other: — Other: — With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mm
• 7306 30 50 85 — Other: — With an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm: — Galvanized
• 7306 30 50 90 — Other: — With an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm: — Other

• 73063 — ТН ВЭД ЕАЭС: прочие сварные, круглого поперечного сечения, из железа или нелегированной стали
• 730630 — EU CN/TARIC: Other, welded, of circular cross-section, of iron or non-alloy steel

Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.