Having a wall thickness of 1.65 mm or more: — Other
Part of: 730650 — Other, welded, of circular cross section, of other alloy steel:
N360469 · 2026-04-29 — The tariff classification of alloy steel pipes from South Korea
The products under consideration are identified as door impact “beams,” BEAM-FR DR REINF, Model Number 76151. These hot-rolled electric resistance welded (ERW) alloy steel pipes are of a circular cross section and are manufactured for use inside doors of specific vehicle models. You indicate that the pipes measure 31.8 mm in outside diameter and 2.6 mm in wall thickness and have been coated for surface treatment and rust prevention. Consideration was given to classifying the beams in subheading 8708.29, Harmonized Tariff Schedule of the United States (HTSUS), which provides for parts of…
H310474 · 2022-02-28 — Affirmation of NY N308564; Classification of Threaded Hollow Bars
(SAS), in which you request reconsideration of two items identified as (1) 28Mn6 self-drilling hollow bar and (2) 36Mn5 self-drilling hollow bar, which are classified in New York Ruling Letter (NY) N308564, dated January 17, 2020, under the Harmonized Tariff Schedule of the United States (HTSUS). U.S. Customs and Border Protection (CBP) has reviewed NY N308564, together with the information in your request, and finds the above-mentioned items to have been correctly classified. The subject merchandise is described in NY N308564 as follows: Item number one (1) is actually two self-drilling…
N050715 · 2009-03-03 — The tariff classification and country of origin determination of steel pipe from Korea
, you requested a tariff classification ruling. The items which are the subject of your inquiry are described as pipe nipples longer than 12 inches in length made in China from pre-cut Korean pipe. The originating pipe from Korea sent to China is described as ERW (Electric Resistance Welded) steel pipe made to ASTM A53 Grade A standards in galvanized and black finishes. The originating material is plain end and in lengths of 6.4 meters. Subsequent information requested by us and received from you indicates that the pipe is cut and threaded in China into lengths of 14 inches to 72 inches and…
I86681 · 2002-10-21 — The tariff classification of steel and rubber pipes, fittings, hoses and gaskets from Italy.
, you requested a tariff classification ruling. The products to be imported are pipes, fittings, hoses and gaskets. The pipes (straight lengths) may be of either nonalloy or alloy steel and may be seamless or welded. The seamless pipes are cold-rolled, have inside diameters of 2", 2 1/2" and 3" and a wall thickness of 2.9 mm. The welded pipes have inside diameters of 4", 4.8" and 5" and wall thicknesses of 3.0 mm, 3.5 mm, 4.0 mm, 4.5 mm, 4.8 mm and 7.1 mm. The products described as angle pipes are actually pipe fittings (elbows). Noting the submitted drawings, these elbows are connected to…
a84778 · 1996-07-15 — The tariff classification of clad steel pipes and bends from the Netherlands.
Descriptive literature was submitted with your request. The products to be imported are pipes and bends made from two-layer clad plates. The clad plates consist of two layers of steel of different chemistries and different physical properties which are roll-bonded together. The clad steel plates are manufactured in Austria and then sent to Holland where they are manufactured into pipes and bends. Both the pipes and the bends will be imported with flanges welded on the ends. The base material used in these clad products is carbon steel, designated as grades ST 14 and RST 37-2. The cladding…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product