Other: — With an outside diameter not exceeding 114.3 mm
Part of: 73065050 — Having a wall thickness of 1.65 mm or more: — Other
N360469 · 2026-04-29 — The tariff classification of alloy steel pipes from South Korea
The products under consideration are identified as door impact “beams,” BEAM-FR DR REINF, Model Number 76151. These hot-rolled electric resistance welded (ERW) alloy steel pipes are of a circular cross section and are manufactured for use inside doors of specific vehicle models. You indicate that the pipes measure 31.8 mm in outside diameter and 2.6 mm in wall thickness and have been coated for surface treatment and rust prevention. Consideration was given to classifying the beams in subheading 8708.29, Harmonized Tariff Schedule of the United States (HTSUS), which provides for parts of…
N303347 · 2019-03-28 — The tariff classification and country of origin of steel pipe from Vietnam
The products under consideration are described as pipe nipples made from pre-cut Vietnamese pipe. According to your submission, plain end Electric Resistance Welded (ERW) steel pipe from Vietnam measuring 5 meters to 6.4 meters in length is exported to China where it is cut to lengths ranging from 12.5 inches to 180 inches, chamfered, threaded, cleaned, an anti-rust treatment is applied and then packaged. The pipe is subsequently imported to the United States. The originating pipe is made to ASTM A53, Grade B standards in galvanized and black finishes with wall thicknesses ranging from 2.77…
N284041 · 2017-03-31 — The tariff classification of pipes from Korea
The products that are intended for import are various lengths of black steel pipe and galvanized steel pipe. All pipes as imported into the U.S. will be more than 12 inches in length. The originating pipes are manufactured in Korea and then sent to China for cutting into shorter lengths, chamfering, threading, cleaning, anti-rusting, inspecting and packing. Mill test certificates submitted show that the pipes are of different types. There is ERW (Electric Resistance Welded) steel pipe made to ASTM A-53, Grade A, both black and galvanized pipe. The mill certificates and your statement indicate…
N245495 · 2013-09-17 — The tariff classification and country of origin determination of steel pipe from Korea
You have submitted a mill certificate with your inquiry. The items under consideration are described as ready cut pipe over 12” in length that are black and galvanized, welded nonalloy steel pipe, threaded on both ends, and used in the plumbing industry. They will be imported from Korea. The pipes will range in diameter from 10.3 mm to 114.3mm with wall thickness ranging from 1.73mm to 7.11mm. They meet ASTM A53 standard specification for pipe, steel, black and hot-dipped, zinc-coated, welded and seamless. Although the mill certificate submitted showed percentages of elements within the…
N040021 · 2008-10-31 — The tariff classification of steel pipe from Thailand.
A representative sample was submitted with your request. The products to be imported are black alloy steel pipes meeting ASTM A53 and described as Type E (electric resistance welded), Grades A and B. These Schedule 40 pipes are available in a variety of sizes with outside diameters ranging from 21.3 mm to 457 mm and wall thicknesses from 2.77 mm to 14.27 mm. Imported with either plain or grooved ends, these pipes will be used for the transference of air and fluids. The applicable subheading for those pipes with an outside diameter greater than 406.4 mm will be 7305.39.5000, Harmonized Tariff…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product