Having shanks or threads with a diameter of 6 mm or more: — Other: — With round heads: — Other
Part of: 73181520 — Bolts and bolts and their nuts or washers entered or exported in the same shipment
N345734 · 2025-02-20 — The tariff classification of a steel, round-head, fin-neck bolt from China
The product under consideration is described as a steel round head fin neck bolt, commonly known as a timber bolt. This partially threaded fastener is made of carbon steel with either a mill finish or a hot-dip galvanized finish. There are 4 fins under the round head that prevent the bolt from turning in the timber. The bolt is available in two sizes: 7/8 inches in diameter by 46.5 inches in length, or 1 inch in diameter by 46.5 inches in length. The bolts are imported with their nuts or washers in the same shipment. The nuts and washers are shipped in woven bags and packed together with…
N310243 · 2020-03-16 — The tariff classification of a hardware set from China
A sample of the fastener set you sent has been examined and will be returned as requested. The product under consideration is described as a “Hardware Kit”, item number 1195506, which is for the assembly of the Lifetime Adventure Clubhouse Swing Set. The hardware kit is made up of five blister packs which contains the required hardware used in each specific assembly step for the swing set. Included in the kit are 162 steel bolts, 167 steel nuts, and 88 steel washers. All the bolts included in the hardware kit are of various lengths, have round heads, and measure 6 millimeters or more in…
N277331 · 2016-07-26 — The tariff classification of a bolt from China
The submitted sample will be retained by this office. The product under consideration, commonly known in the trade as a “Crane Mat Bolt,” is a round head fastener made of carbon steel. It measures 0.906 inch (23.012 mm) in diameter by 4 feet (1,219 mm) in length. The end of the shank includes 5 inches (127 mm) of course threads measuring 8 threads per inch. You indicate that the fastener is inserted through holes in wood and serves to hold as many as six 8-inch square by 20-foot long planks of wood together. You propose classification of the subject fastener in subheading 7318.15.8085,…
N190945 · 2011-11-15 — The tariff classification of a carriage bolt from China.
You have described the item as a zinc plated steel carriage bolt measuring 3/8” x 6 1/2”. The picture you submitted indicates that this fastener is fully threaded with a round head and square neck. You have stated that the carriage bolts will be imported with an equal number of nuts and washers to be used with the carriage bolts. They will be used for bolting together laminated timbers in the construction of crane mats. The applicable subheading for the carriage bolt will be 7318.15.2055, Harmonized Tariff Schedule of the United States (HTSUS), which provides for screws, bolts, nuts, coach…
N167096 · 2011-06-06 — The tariff classification of a carriage bolt, double helical spring lock washer and a hex flange nut from China and Taiwan.
You have submitted literature and drawings describing the following steel items: Square head machine bolt measuring 5/8” x 2” – part number 30013 Fully threaded round head square neck carriage bolt measuring ½” x 2” – part number 30060 1 3/8” long T head nail – part number 30078 3/8” hex flange nut – part number 30451 ½” double coil helical spring lock washer – part number 30282 You have stated that these items are to be used for assembly of equipment racks utilized in the construction of over-head power lines. The applicable subheading for the carriage bolt will be 7318.15.2055, Harmonized…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product