Of copper alloys
Part of: 7412 — Copper tube or pipe fittings (for example couplings, elbows, sleeves):
N259868 · 2014-12-19 — The tariff classification of pneumatic connectors from Germany
Representative samples were included with your submission and will be retained by this office. The products under consideration are described as pneumatic connectors, part numbers 14478051, 14478052 and 14478053, used in vehicles with air suspensions. The pneumatic connectors are made primarily of brass (97.8%) and consist of the following items: a socket, a connector/bushing, a toothed ring, 3 O-rings and a plug. You state that these products serve as the connector between plastic air tubes and the magnetic valve block body. You suggest classification of the pneumatic connectors in…
N019150 · 2007-11-19 — The tariff classification and country of origin marking of downpipe outlets from China.
The products to be imported are downpipe outlets used to connect round gutter downpipe to the gutter. This outlet is available in either copper or aluminum. The applicable subheading for those copper downpipe outlets meeting the Chapter 74 Note 1(a) definition of refined copper will be 7412.10.0000, Harmonized Tariff Schedule of the United States (HTSUS), which provides for copper tube or pipe fittings (for example, couplings, elbows, sleeves), of refined copper. The rate of duty will be 3 percent. The applicable subheading for those copper downpipe outlets meeting the Chapter 74 Note 1(b)…
L83398 · 2005-03-31 — The tariff classification of brass fittings from Mexico and Taiwan.
Your samples are being returned to you. You have submitted five samples of brass fittings that are used in commercial and residential plumbing applications. Part number 817ET-1 is a chrome-plated, brass 20 gauge extruded branch fitting that is threaded on top and has a nut attached. Part number 8482 is a chrome-plated brass 4” slip elbow that is threaded on both ends and has nuts attached to each end. Part number 1046-1 is a chrome-plated 20 gauge extruded brass offset fitting that is threaded on both ends and has nuts attached to each end. Part number 793C-1 is a chrome-plated 20 gauge brass…
h84215 · 2001-08-02 — The tariff classification of brass pipe fitting blanks from Mexico.
You stated the brass pipe fitting blank will be imported by Nibco, Inc., Elkhart, IN. As a blank, you stated it is an unfinished pipe fitting. In the United States, the fitting will be machined and the end will be threaded. The sample submitted is a 1¼” fitting. The applicable subheading for the brass pipe fitting blank will be 7412.20.00, Harmonized Tariff Schedule of the United States (HTS), which provides for Copper tube or pipe fittings (for example couplings, elbows, sleeves): Of copper alloys: Other: Of copper-zinc base alloys (brass). The general duty rate will be 3% ad valorem. This…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product