Other: — Of copper-zinc base alloys (brass): — Threaded: — Other
Part of: 74122000 — Of copper alloys
N327463 · 2022-08-19 — The classification of valves and a fitting from Taiwan
Descriptive information was provided. The first item under consideration is pneumatic valve, model number 149777. The second item under consideration is a pneumatic valve, model number 97676. Both items are referred to as stem-controlled valves. The brass valves are used with pneumatic test plugs and are designed to be manually actuated. In operation, the valve’s pin is depressed and released to control the flow of air. The valves have a pressure rating greater than 850 kPas. The third item under consideration is an adapter fitting, model number 97118. The adapter fitting is described as a…
N259868 · 2014-12-19 — The tariff classification of pneumatic connectors from Germany
Representative samples were included with your submission and will be retained by this office. The products under consideration are described as pneumatic connectors, part numbers 14478051, 14478052 and 14478053, used in vehicles with air suspensions. The pneumatic connectors are made primarily of brass (97.8%) and consist of the following items: a socket, a connector/bushing, a toothed ring, 3 O-rings and a plug. You state that these products serve as the connector between plastic air tubes and the magnetic valve block body. You suggest classification of the pneumatic connectors in…
N032392 · 2008-07-28 — The tariff classification, country of origin and marking requirements for an air compressor accessory kit from Taiwan
Descriptive literature and an illustration were submitted. The item in question is described as an air compressor accessory kit. The kit is comprised of a nylon coil tube assembly, an air chuck, two valves, a stud, a coupler, an air blow gun, three gun blow tips, pipe thread tape and an air pressure gauge. The nylon coil tube assembly is imported with fittings on both ends. It attaches to the air compressor on one end and to another item such as an air blow gun or air chuck on the other end. Its purpose is to route the air from the compressor. The air chuck is a hand operated device made of…
N015690 · 2007-08-27 — The tariff classification of brass fittings from China.
Representative samples were submitted with your request. The products to be imported are brass fittings. They are threaded on both ends and are used for connecting garden hoses to water pipes. While all of the fittings are constructed of solid brass, those with swivel connections also include plastic hose washers. The applicable subheading for the brass fittings will be 7412.20.0035, Harmonized Tariff Schedule of the United States (HTSUS), which provides for copper tube or pipe fittings (for example couplings, elbows, sleeves), of copper alloys, other, of copper-zinc base alloys (brass),…
M87518 · 2006-11-01 — The tariff classification of threaded brass elbows from China.
The merchandise is comprised of threaded brass elbows in styles A and B, of various sizes. These threaded elbows have been specially made for incorporation into the E-75RS rotary joint. The E-75RS rotary joint is a device used in the conveyance of water or steam. The brass elbow constitutes the stationary supply pipe end of the E-75RS rotary joint. Applications for this product include couplings to chilling rolls for printing and steel production machinery. The applicable subheading for the threaded brass elbows will be 7412.20.0035, Harmonized Tariff Schedule of the United States (HTSUS),…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product