Other mountings, fittings and similar articles suitable for motor vehicles; and parts thereof:
N120763 · 2010-09-21 — The tariff classification of an upper roller assembly from Japan
The merchandise under consideration is described as an upper roller assembly (Aisin part number 424441-10060). The upper roller assembly functions, along with a lower roller assembly (subject of N113962, August 6, 2010) to support and guide the sliding side door of a van. Together the assemblies facilitate the outward and rearward motion of the van door as it slides open and the inward and forward motion of the van door as it slides closed. The upper and lower roller assemblies are attached onto the upper or lower portion of the door respectively, and move on tracks attached to the body of…
N121535 · 2010-09-19 — The tariff classification of vehicle door checks from Canada
The samples you submitted will be retained by this office. The merchandise under consideration is two door checks, which function to prevent a vehicle door from opening too far and to hold the door open when desired. The first door check has an arm made of plastic covered steel. A steel swivel bracket is attached to one end of the arm; this will be mounted to the vehicle body. A plastic housing assembly with two protruding steel studs is attached to the other end of the arm; this will be mounted to the vehicle inner door. The second door check is similar in structure, except that it is larger…
N120941 · 2010-09-13 — The tariff classification of a vehicle door bushing from Japan
The submitted sample will be retained by this office. The merchandise under consideration is a vehicle door bushing made of copper. It is a round, unthreaded, flanged fitting that does not incorporate ball bearings or moving parts. It weighs 11 grams and has an outer diameter of 21 mm, an inner diameter of approximately 12 mm and a depth of 7.5 mm. The bushing is designed to be used in the sliding door roller assembly of a motor vehicle. The sliding door roller assembly supports and guides a door on a minivan or other vehicle to open and slide along a rail. The primary function of the bushing…
H025860 · 2009-11-20 — Classification of Cast Iron Engine Mount Brackets; Application for Further Review of Protest No. 3801-07-100529
The following is our decision regarding the Application for Further Review (“AFR”) of Protest No. 3801-07-100529, timely filed on behalf of Machining Enterprises, Inc., d.b.a. Enterprise Automotive Systems, concerning the classification of certain cast iron engine mount brackets under the Harmonized Tariff Schedule of the United States (“HTSUS”). In reaching this decision, we considered supplemental information submitted by the Protestant to this office on September 4, and 25, 2009. FACTS: This Protest concerns twenty-one entries of cast iron brackets used to secure an engine to an automobile…
H047742 · 2009-09-03 — Classification of upper strut mount/bearing plate; Internal Advice 08/026
S. Customs and Border Protection (CBP) Regulations, Part 177 (19 C.F.R. §177). The request pertains to the classification of an “upper strut mount” under the Harmonized Tariff Schedule of the United States (HTSUS). FACTS: The subject merchandise is referred to as an “Upper Strut Mount” and was also described in entry documents as a “Bearing Plate.” The metal sample presented referred to the merchandise as a “Strut-Mate Mounting Kit” (hereinafter, the upper strut mount/bearing plate). It is comprised of an outer and inner stamping of low carbon steel, four threaded studs of high carbon steel,…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product