Other
N273667 · 2016-03-14 — The tariff classification of base metal mounts for vehicle rear-view mirrors from South Korea
Pictures of the articles were submitted with your request. The products under consideration are three mounts for vehicle rear-view mirrors. Each is made from a single casting and is similar in appearance and function; however, one is made of aluminum, one is made of magnesium, and one is made of zinc. The mounts serve to attach a rear-view mirror to the front windscreen in the interior of an automobile. They attach to the back of the rear-view mirror and provide necessary tension to enable the mirror to pivot and stay in position. You question whether classification in subheading…
N265254 · 2015-06-23 — The tariff classification of a Safety Hook & Release Lever Assembly from South Korea.
Descriptive literature and illustrations were submitted with your letter. The article in question is described as the Safety Hook & Release Lever Assembly - Hood, part number 81140-2W000. It is stated in your letter that the item is a part that is designed to lock and unlock the hood of a motor vehicle. It is said that the Hood Latch is strictly mechanical. It is actuated/released via a mechanical cable that runs from the passenger compartment to the hood release pawl. It also incorporates a secondary safety catch/latch that is actuated/released by a lever under the vehicle’s hood. Its…
N210957 · 2012-04-12 — The tariff classification of a vehicle mounting from Japan
The submitted sample will be retained by this office. The merchandise under consideration is described as a Mount Belt Cover, part number 13592AA011. It is a ring-shaped automotive part that measures approximately ½ inch in diameter and comprises an inner ring of brass and an outer ring of nitrile butadiene rubber. The Mount Belt Cover attaches to a feature on the timing belt cover. Along with a threaded fastener (not included) it serves to hold the timing belt cover in place by mounting it to the engine block. The rubber outer portion of the Mount Belt Cover serves to dampen vibration. The…
N120763 · 2010-09-21 — The tariff classification of an upper roller assembly from Japan
The merchandise under consideration is described as an upper roller assembly (Aisin part number 424441-10060). The upper roller assembly functions, along with a lower roller assembly (subject of N113962, August 6, 2010) to support and guide the sliding side door of a van. Together the assemblies facilitate the outward and rearward motion of the van door as it slides open and the inward and forward motion of the van door as it slides closed. The upper and lower roller assemblies are attached onto the upper or lower portion of the door respectively, and move on tracks attached to the body of…
N120941 · 2010-09-13 — The tariff classification of a vehicle door bushing from Japan
The submitted sample will be retained by this office. The merchandise under consideration is a vehicle door bushing made of copper. It is a round, unthreaded, flanged fitting that does not incorporate ball bearings or moving parts. It weighs 11 grams and has an outer diameter of 21 mm, an inner diameter of approximately 12 mm and a depth of 7.5 mm. The bushing is designed to be used in the sliding door roller assembly of a motor vehicle. The sliding door roller assembly supports and guides a door on a minivan or other vehicle to open and slide along a rail. The primary function of the bushing…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product