Of casting machines: — Of die casting machines
Part of: 84549000 — Parts
h89456 · 2002-04-01 — The tariff classification of cores for die casting dies from Japan.
Die casting dies (molds) consist of a fixed die half mounted on the side toward the metal injection system and an ejector or movable die half which is mounted on the movable platen. Fixed and movable cores are often used in dies. In this instance, the fixed half consists of a stationary frame, Core B1, Core B5, chill vent core, die sleeve and four guide pins. The movable half consists of a moveable frame, Core A1, Core A3, Slide Core C1, die base and four guide pins. The cores are used to shape aluminum timing chain covers for automobile engines. Parts such as the frame and base do not wear…
h88655 · 2002-03-04 — The tariff classification of a hydraulic cylinder, spline core, slide core and impression steel for die casting dies from Japan
A die cast die is a mold which has molten material injected into it by a die cast machine at a high velocity and pressure in order to produce an article in a defined shape and dimension. The molten material solidifies and the casted article is ejected from the die. Each die cast die is composed of a number of moveable and replaceable parts. These parts are unique to that specific die and are not interchangeable. Several of these parts are the subject of this letter. The hydraulic cylinder is used to move slide cores (and other movable parts of the die) during the die casting process. The…
h88656 · 2002-03-03 — The tariff classification of a holder block, die insert, die sleeve, ejector pin and core pin for die casting dies from Japan.
A die cast die is a mold which has molten material injected into it by a die cast machine at a high velocity and pressure in order to produce an article in a defined shape and dimension. The molten material solidifies and the casted article is ejected from the die. Each die cast die is composed of a number of moveable and replaceable parts. These parts are unique to that specific die and are not interchangeable. Several of these parts are the subject of this letter. The holder block is a base upon which the balance of the die cast die components (e.g., slide cores, inserts, sleeves, etc.) are…
h81100 · 2001-05-22 — The tariff classification of cores and inserts for die casting dies from Japan.
The Blowby Insert, part number DIE 0598, is a hollow object made of steel alloy that weighs approximately 3 kilos. In use, molten aluminum flows to a mold through the blowby insert. The Bore Insert, part number DIE 0594, also known as a bore pin or core pin, is a cylindrical solid object with a tapered end, made of steel alloy. It weighs approximately 10 kilos. Bore inserts are set inside the mold to shape the cylinder holes. They are imported in sets of four, six or eight, depending on the number of cylinders in the engine block. The Crank Cooling Core, part number DIE 2344, is also part of…
f88310 · 2000-06-23 — The tariff classification of a movable core for a die casting machine from Japan.
You describe the item, part number DC1019, as a slide core for a metal die casting machine. The core is a solid object made of steel alloy that weighs approximately 2 kilos. Die casting dies (molds) consist of a fixed die half mounted on the side toward the metal injection system and an ejector or movable die half which is mounted on the movable platen. Fixed and movable cores are often used in dies. If movable, they are often attached to core slides (hydraulic cylinders). Per our telephone conversation, your item is a movable core which will be attached to a core slide. It will be used with…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product