Of casting machines: — Other
Part of: 84549000 — Parts
N302217 · 2019-04-29 — The tariff classification of core vents from Germany
The core box air release vents are used in foundry core boxes during the production of castings. They enable "core blowing" equipment to effectively fill the core box with sand, and allow for the safe escape of gases, heat, and air during core manufacturing. The vents are available in various materials, i.e., brass, brass alloy, steel, aluminum and nylon, sizes and slot widths for a wide range of applications. In your letter, you state that the instant vents are designed for use in metal casting machines. The applicable subheading for the brass, brass alloy, steel, aluminum vents, designed…
I88900 · 2002-11-25 — The tariff classification of caster roll units from Sweden
of Norristown, Pennsylvania you requested a tariff classification ruling. The SKF Caster Roll Units are all designed for use in a continuous casting machine. The rolls range in diameter from approximately 4.3” to 12.2” with overall lengths from 5’ to 10’. The smaller rolls are used in the curved cooling and containment section descending below the mold while the larger rolls are at the bottom in the straightening and withdrawal section. The roll units are essentially steel rollers mounted on shafts, with housings or clamp blocks which enable them to be mounted to the caster’s support frame.…
a89936 · 1996-11-27 — The tariff classification of a casting wheel from Germany.
The merchandise consists of a metal, spoked casting wheel measuring 120 inches in diameter which is used in a continuous casting machine. The principal function of the casting wheel is to shape molten copper into a solidified, trapezoidal bar. Unlike the continuous casting of billets, blooms and slabs with the continuous stream of molten metal pouring into stationary molds, continuous rod and bar casting systems use molds which revolve. The wheel has an outwardly facing annular peripheral groove. During a portion of its rotation, the casting wheel is covered by a steel band, forming a cavity…
812234 · 1995-07-18 — The tariff classification of copper mold tubes and mold plates from Germany.
The copper mold tubes are fixed size molds used in continuous casting operations. They may be square, rectangular, polygonal etc., straight or curved. The copper mold plates are used in fixed and adjustable continuous casting molds which generally consist of two wide face plates and two narrow end plates. The individual plates generally have cooling slots and the casting surfaces may be straight or machined. The applicable subheading for the copper mold tubes and copper mold plates will be 8454.90.0060, Harmonized Tariff Schedule of the United States (HTS), which provides for parts of casting…
895948 · 1994-04-07 — The tariff classification of copper tubular molds for continuous casting machines from Japan.
The product brochure describes copper tubular molds for continuous casting. The types includes straight tubular and curved tubular. Cross sections may be square, rectangular, hexagonal or circular. The applicable subheading for the copper tubular molds will be 8454.90.0060, Harmonized Tariff Schedule of the United States (HTS), which provides for parts of casting machines. The rate of duty will be free. This ruling is being issued under the provisions of Section 177 of the Customs Regulations (19 C.F.R. 177). A copy of this ruling letter should be attached to the entry documents filed at the…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product