Other connectors
Part of: 85359080 — Other
N362881 · 2026-07-14 — The tariff classification of deadend connectors from Mexico
There are four items under consideration with this request, which are all identified as deadend connectors for use in high voltage overhead power transmission or distribution systems and are individually identified as (Item 1) Aluminum Bolted Deadend with Stirrup Clamp (Model No. ADES70N) (“the Stirrup Model”); (Item 2) Straight Line, Spring-Loaded, Side-Opening Aluminum Bolted Deadend (Model No. ADEZ116N) (“the Spring-Loaded Model”); (Item 3) Straight Line, Strain Clamp Aluminum Bolted Deadend (Model No. ADS88N) (“the Aluminum Model”); and (Item 4) Aluminum Quadrant Strain Clamp Bolted…
N280105 · 2016-10-28 — The tariff classification of an electrical connector from Germany.
The merchandise under consideration is referred to as a photovoltaic connector, part number 1621796, and is described as a crimp style electrical connector used in solar panel wiring applications. The connector housing is constructed of plastic with latching tabs to lock the electrical cable in place when attached. The connector is intended to be used outdoors and has an internal rubber seal and an o-ring that protects the electrical contact during harsh weather conditions. The nominal current/voltage rating of the photovoltaic connector is 27A/1500V, respectively. The applicable subheading…
N242525 · 2013-06-21 — The tariff classification of transformer bushings from Germany
, you requested a tariff classification ruling. The bushings under consideration are described as the “Transformer Bushings IEEE/ANSI Standard, COTA 150 – COTA 2050”. These are Trench bushings designed for application on liquid filled power transformers. The bushings insulate the center conductor from the transformer tank, conduct current into or from the transformer, and connect the power transformer to overhead lines or to an exposed bus in either outdoor or indoor conditions. The bushing is an electrical engineering component that insulates a high-voltage conductor passing through a metal…
N037924 · 2008-10-08 — The tariff classification of a fuse assembly from Mexico.
The merchandise under consideration is the Bay-O-Net Fuse Assembly. A sample of the fuse assembly with fuse installed was submitted with your ruling request and will be returned to you. The Bay-O-Net Fuse Assembly is designed for use in pad-mounted or subsurface oil filled distribution transformers. The Bay-O-Net Fuse Assembly is available in two versions, cover-mounted or sidewall-mounted. The submitted sample is a sidewall-mounted fuse assembly, which consists of a hollow plastic cylinder or tube measuring approximately 13 inches long with an outside diameter of 1¼ inches. An outer collar…
N026524 · 2008-05-14 — The tariff classification of bushings used with electrical transformers from China.
The merchandise under consideration are high voltage bushing assemblies, Part Numbers AS-1132-21-00 (18 KVA rating), AS-1132-29-00 (18 KVA rating), AS-1305-02-00 (8.7 KVA rating), AS-1143-23-00 (15 KVA rating) and AS-1143-24-00 (15 KVA rating). The five bushing assemblies consist of a porcelain insulator, cap assembly, handwheel assembly, electrical conductor and other hardware (i.e., nuts, washers, eyebolts, gaskets, etc.). The high voltage bushings are apparatus used primarily in applications with transformers and other high voltage power systems. The porcelain insulates the center…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product