Other
Part of: 85359080 — Other
N316882 · 2021-01-25 — The tariff classification of bus bars from Brazil
The merchandise under consideration is referred to as bus bars, which are described as being composed of a highly conductive electrical grade aluminum alloy. At the time of importation, the bus bars are pre-cut to customer requirements and further worked by rounding the edges to specifications. You state that the rounded edge is intended to reduce electrical corona discharge, which is a requirement for high voltage applications. The bus bars have a maximum rating of up to 115 kV. You indicate that the bus bars do not undergo any additional work post importation, except for final drilling for…
N035815 · 2008-09-07 — The tariff classification of vacuum contactors from Japan.
The merchandise under consideration are two Vacuum Contactors, Model Numbers CV10-HA and CV-10HB, suitable for switching systems and other electrical distribution apparatus. The contactor section is comprised of a vacuum sealed housing which encloses the contacts and an electromagnet. This design restricts the formation of an electrical arc, thereby extending the life of the contacts. The CV10-HA is rated for a maximum of 15,000 volts (V), while the CV-10HB is rated for a maximum of 12,000 V. In your ruling request you suggest classification of the vacuum contactors under 8537.20.0040,…
N022261 · 2008-02-11 — The tariff classification of ground clamps from Mexico and U-Bolts.
The merchandise under consideration consists of three grounding equipment connectors identified as Type GRC12/258150 Ground Rod Clamp, GB29/264127 Ground Connector, GAR6426/260820 Ground Connector, and two U-Bolts identified as UB469G/264959 Galvanized Steel U-Bolt and UB199/264626 Silicon Bronze U-Bolt. A sample of each item was submitted with your ruling request. The Type GRC12/258150 Ground Rod Clamp is a casting of copper alloy. This apparatus is oval in shape measuring approximately 1.3750 inches long by .89 inches wide and .63 inches thick. One end of the clamp is drilled and taped for…
I85783 · 2002-09-25 — The tariff classification of an anti-static bar from Japan
As indicated by the submitted information, the anti-static bar, identified as part number IQE8857004, is used to hold a built-up static electricity charge and subsequently discharge it to the ground. It is capable of handling in excess of 1,000 volts. The applicable subheading for the anti-static bar, part number IQE8857004, will be 8535.90.8060, Harmonized Tariff Schedule of the United States (HTS), which provides for other apparatus for protecting electrical circuits: For a voltage exceeding 1,000 V. The rate of duty will be 2.7 percent ad valorem. This ruling is being issued under the…
b81256 · 1997-02-11 — The tariff classification of on load tap-changers from England
As indicated by the submitted descriptive literature, the on load tap-changer is a high voltage current interruptor which is based on the principle of rapid switching. It appears to be of the selector switch type in which all makings and breakings take place between the fixed and moving contacts of the selector switch. The applicable subheading for the on load tap-changers will be 8535.90.8060, Harmonized Tariff Schedule of the United States (HTS), which provides for other electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product