Gaskets, washers and other seals
Part of: 392690 — Other:
N302278 · 2019-02-06 — The tariff classification of a plastic junction box panel and gasket from China.
The first item is described as “rear j-box housing panel PN: 404083.” It is a plastic injection molded rear housing panel that will be part of a junction box. From the information provided, as imported it would only be the plastic component. The second item is described as “internal j-box gasket PN: 404082.” It is a molded silicone gasket and will be placed between the front and rear j-box housing panels to create a seal that would make the j-box water resistant. In your request, you proposed that the rear j-box housing panel should be classified under 8538.90.6000, which provides for…
i80175 · 2002-05-02 — The tariff classification of automotive air seals from Japan.
, you requested a tariff classification ruling. Two samples were submitted with your letter. Article 022025-6850 is described as an air seal for an automotive radiator. It is made of cellular urethane and is in the form of a strip measuring approximately 28 inches in length, ½ inch in width and 5/16 inch in thickness. One side of the strip is coated with an adhesive material protected by a peel-off paper strip. To install the seal, the transfer paper is removed and the adhesive side of the seal is placed directly on the radiator. The fan shroud is installed directly over the seal. The strip…
956095 · 1995-01-20 — Protest 1001-93-107467; Plastic Pipettes and Parts of Pipettes; Plastic Closing Rings; Steel Springs; Explanatory Note 84.79; Mechanical Appliances; Chapter 39, Note 2(o); Section XVI, Notes 1(g) and2; Section XV, Note 2; 3926.90.95
The following is our decision regarding Protest 1001-93-107467 concerning your action in classifying and assessing duty on plastic pipettes and parts of pipettes under the Harmonized Tariff Schedule of the United States (HTSUS). FACTS: The merchandise consists of plastic pipettes (Models 3130, 3190, 4700, 4720, 4780, 4800, 4810, and 4830) and parts of pipettes. The pipettes are high precision devices which are used to transfer precise amounts of liquid from one vessel to another. Models 4800 and 4810 Models 4800 and 4810 are constructed from four cylindrical polyetherimide pieces fitted…
956285 · 1994-08-08 — Protest 3126-92-100019; Spare Parts of Toothed Shaft Coupling; Nuts and Bolts; O-Rings; Complete and Unassembled; GRI 2(a); Explanatory Notes 2(a)(V) and (VII); HQs 088891, 951713, 953860, and 950886; Section XVI, Note 1(g); Section XV, Note 2(a); 8483.90.50; 8483.60.80
The following is our decision regarding Protest 3126-92- 100019 concerning your action in classifying and assessing duty on spare parts for a MAAG toothed shaft coupling under the Harmonized Tariff Schedule of the United States (HTSUS). FACTS: The merchandise consists of spare parts for a MAAG toothed shaft coupling (model type ZUD-7). The parts are comprised of a coupling, fasteners (nuts and bolts), and plastic O-ring gaskets. A MAAG toothed shaft coupling is a mechanical assembly which allows a drive shaft and a driven shaft to be joined together in such a way as to provide for the direct…
953257 · 1993-03-30 — PTFE gaskets; gasketing material; self-adhesive
FACTS: Customs has viewed six samples: 1.) Finished ring gaskets in various diameters; and 2.) Adhesive-backed joint sealant rounded on the edges, ranging from 1 mm to 1 inch at the greatest cross-section and imported in material lengths on spools; 3.) Round valve stem packing ranging from 3/32 inch to 3/8 inch at the greatest cross-section and imported in material lengths on spools; 4.) Gasket tape 1/2 inch wide imported in material lengths on spools. 5.) Adhesive-backed gasket "tape" 8 inches wide, ranging from 10 mils to 120 mils uniformly thick and imported in material lengths. (You…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product