Other
Part of: 39269045 — Gaskets, washers and other seals
N359076 · 2026-03-18 — The tariff classification of a plastic foam gasket from China.
A sample was provided and will be returned separately. The product under consideration is described as the “FF Holder Gasket,” SKU number 305-00021-000.A1. It is a gasket made of polyurethane plastic foam and will be used in the production of your aviation headsets. This item is used to mount and seal the external environment microphone and serves several critical roles in acoustic isolation, mechanical stability, environmental sealing, and active noise reduction (ANR) system accuracy. The applicable subheading for the “FF Holder Gasket,” SKU number 305-00021-000.A1, will be 3926.90.4590,…
N356063 · 2025-12-05 — The tariff classification of a plastic washer from the Philippines.
Images were submitted in lieu of a sample. The product under consideration is described as the “Washer, Boom,” SKU number 312-00003-000.A1. It is a washer made of polytetrafluoroethylene (PTFE) plastic and will be used in the production of aviation headsets. The washer is oval in shape, with one flat edge, and will measure 34.8 millimeters in height by 26.29 millimeters in length by 1.27 millimeters in width. The applicable subheading for the “Washer, Boom,” SKU number 312-00003-000.A1, will be 3926.90.4590, Harmonized Tariff Schedule of the United States (HTSUS), which provides for “[o]ther…
N355173 · 2025-11-12 — The tariff classification and country of origin of a silicone plastic seal from China.
Images were submitted in lieu of a sample. The product under consideration is described as an inflatable silicone seal, part number BF13-28-1032. It is intended for use in a Technopak 25-kilogram milk powder packaging machine. Your submission indicates that this product is initially molded in China from “Elastosil R Plus 4000/40 K2 CN” silicone plastic. It will then be exported to New Zealand where it undergoes a proprietary heat treatment and quality assurance process that fully crosslinks the material and produces the final FDA-compliant component. The applicable subheading for the…
N349269 · 2025-06-12 — The tariff classification of a grommet and seals of silicone plastic from Mexico.
Images were provided in lieu of samples. This request consists of three products for consideration. The first item is described as a “6 Way Grommet,” internal part number 211390. It is designed to guide and organize six cables or wires passing through it. The grommet measures 0.606 inches wide by 0.616 inches long by 0.275 inches deep. The second item is described as a “23 Position Amp Mating Seal,” internal part number 311016. It is a molded gasket that creates a seal to protect electrical connections from dust, water, and other contaminants. The seal measures 41.4 millimeters wide by 21.6…
N349241 · 2025-06-12 — The tariff classification of a silicone plastic plug and seal from Mexico.
Images were provided in lieu of samples. This request consists of two products for consideration. The first item is described as a “Mini UMNL Cavity Plug Seal,” internal part number 117001. It is a small plug designed to block off an empty cavity in a Universal MATE-N-LOK (UMNL) electrical connector where a wire is not being used. It measures 4.1 millimeters in diameter at its widest point and is 7 millimeters long. The second item is described as a “6P Interface Seal,” internal part number 812018. It is a component used in six position (6P) electrical connectors and is specifically designed…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product