O-Rings
Part of: 39269045 — Gaskets, washers and other seals
N314063 · 2020-08-27 — The tariff classification of two O-rings.
Images were submitted in lieu of samples. The articles under consideration are both described as O-rings, and are made from Chemraz perfluoroelastomer material, which would be considered a plastic of chapter 39. In your submission, you state these O-rings will be manufactured in the United States, but will be exported to foreign distribution centers in Europe and Asia, and then will be imported from these foreign distribution centers. You further indicate that Applied Materials, Inc., does not currently utilize heading 9801, for U.S. goods returned, and they want the ten-digit Harmonized…
N305508 · 2019-08-07 — The tariff classification of five parts of a needleless injection system from China
The parts under consideration are O-ring (part # 05-10075-002), Return Sleeve (part # 20-10093-001), Lock Sleeve (part # 20-10094-001), Tube (part # 20-10068-001), and Hammer Ring (part # 20-10092-001). They are used in two of three components of PharmaJet’s Tropis Needle-free Injection System consisting of a needle-free syringe, a filling adapter with a spike, and a handheld injector. The syringe is used to house a vaccine in preparation of administration and the injector is a mechanical system comprised of multiple parts that work together to perform the function of driving the vaccine out…
N304996 · 2019-07-25 — The tariff classification of a stainless steel dog bowl and lid components from China.
You have submitted photographs and detailed descriptions of components of a water bowl for dogs identified as the “Slopper Stopper.” The components include a silicone plug, a molded plastic lid, a silicone gasket and a stainless steel bowl, which will be imported separately. Item 1 is described as a silicone plug. The purpose of the plug is to seal a hole in the plastic lid. It is circular with a diameter of 2 inches. Item 2 is described as a plastic dog bowl lid. It is a molded plastic lid with a diameter of approximately 9.84 inches and 2.5 inches thick. The applicable subheading for the…
N303722 · 2019-04-26 — The tariff classification and country of origin marking of shells, end-caps and O-rings from China
In your corrected ruling request dated March 28, 2019, on behalf of your client Aeration Technology, LLC, you requested a classification and marking ruling on shells, end-caps and O-rings. Photographs, drawings and a manufacturing process flow chart were submitted for our review. This ruling addresses issues A and D of the six items in your request letter. Issues B, C, E, and F were addressed in N303461 dated April 9, 2019. Your submission identified the products at issue as shells, sealing end-caps and O-rings to be used as components of finished Elite Chargers used in whipped-cream…
N259872 · 2014-12-22 — The tariff classification of plastic and rubber O-rings from Germany
The submitted samples are identified as O-rings that will be used to assemble magnetic valve blocks in automobiles with air suspensions. They are further identified as follows: Part Number 13997 052 – This O-ring is made of silicone plastic material and measures approximately 10.5 mm in diameter from the outer surfaces of the O-ring. The inner aperture measures approximately 7.5 mm in diameter and the material of the O-ring measures approximately 1.5 mm in diameter. Part Number 14489 051 – This O-ring is made of silicone plastic material and measures approximately 6.5 mm in diameter from the…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product