4412 39 40 61

Code

4412 39 40 61

Type

10-digit tariff line

Duty rate

8% (set at subheading 44123940)

Unit

m3

Classification rulings (U.S. Customs, CROSS)

• N295153 · 2018-04-06 — The tariff classification of furniture-grade plywood panels from China

  The ruling was requested on plywood panels used for furniture manufacturing. Samples were submitted and will be retained for reference. The panels are imported in various measurements and ranging from 18mm to 25mm in thickness. The panel samples are constructed of 11 plies of wood, each ply measuring approximately 1.5mm in thickness. You state that the outer plies – front and back - consist of New Zealand pine, i.e., Pinus radiata, or Radiata pine, a coniferous wood. You note that other species of wood could be utilized for the face and back plies. The core consists of 9 poplar plies. The…

• N098408 · 2010-04-18 — The tariff classification of plywood with face plies of birch, red oak, and cedar, not surface covered, from Indonesia

  The ruling was requested on two groups of plywood panels, not surface covered. Both groups of plywood panels have face plies made of the following wooden species: birch (Betula alleghantensis Britton), red oak (Quercus rubra) or cedar (Juniperus virginiana). The core and the back are made of birch, red oak, cedar or lauan/red meranti (Shorea parvifolia Dyer). For the purposes of this ruling, the veneers used as the back ply are always of an inferior quality in relation to the face ply. You state that the subject plywood is usable in the general construction of cabinet facing and furniture.…

• N030060 · 2008-07-02 — The tariff classification of spruce or fir plywood strips from Canada

  The ruling was requested on plywood strips, measuring ¾” x 1 ¾” x 96”, used as strapping to build up the countertops for cabinet units. The strips are composed of 1/8” thick layers of spruce or fir (assumed to be other than Douglas fir). The plywood strips are unfinished with square cut edges and ends. You suggested classification of the plywood strips with outer plies of spruce or fir in subheading 4412.99.8000, Harmonized Tariff Schedule of the United States (HTSUS). However, the subject plywood, described above, consists of sheets or plies of wood each under 6 mm in thickness and is,…

• 4412 39 40 11 — With at least one outer ply of Douglas fir (Pseudotsuga menziesii): — Rough, or touch sanded for sizing purposes, but not further processed
• 4412 39 40 12 — With at least one outer ply of Douglas fir (Pseudotsuga menziesii): — Fully sanded on at least one face, but not further processed
• 4412 39 40 19 — With at least one outer ply of Douglas fir (Pseudotsuga menziesii): — Other
• 4412 39 40 31 — With at least one outer ply of long leaf pine (Pinus palustris), short leaf pine (Pinus echinata), southern yellow pine (loblolly pine)(Pinus taeda), slash…
• 4412 39 40 32 — With at least one outer ply of long leaf pine (Pinus palustris), short leaf pine (Pinus echinata), southern yellow pine (loblolly pine)(Pinus taeda), slash…
• 4412 39 40 39 — With at least one outer ply of long leaf pine (Pinus palustris), short leaf pine (Pinus echinata), southern yellow pine (loblolly pine)(Pinus taeda), slash…
• 4412 39 40 51 — With at least one outer ply of Agathis spp.: — Rough, or touch sanded for sizing purposes, but not further processed
• 4412 39 40 52 — With at least one outer ply of Agathis spp.: — Fully sanded on at least one face, but not further processed
• 4412 39 40 59 — With at least one outer ply of Agathis spp.: — Other
• 4412 39 40 62 — Other: — Fully sanded on at least one face, but not further processed
• 4412 39 40 69 — Other: — Other

• 44123 — ТН ВЭД ЕАЭС: фанера клееная прочая, состоящая исключительно из листов древесины (кроме бамбука), толщина каждого из которых не более 6 мм
• 441239 — EU CN/TARIC: Other plywood consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm thickness — Other, with both outer plies of coniferous wood

Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.