4412 39 40 69

Code

4412 39 40 69

Type

10-digit tariff line

Duty rate

8% (set at subheading 44123940)

Unit

m3

Classification rulings (U.S. Customs, CROSS)

• N303171 · 2019-03-26 — The tariff classification of wood flooring from Austria

  Product information and photos were provided for our review. In your request, you describe two constructions of wood flooring. The first is a three-layer panel with a face ply of larch wood (a coniferous wood) measuring 5mm in thickness, a core of 5mm-thick pine, and a back ply of 5mm-thick larch. The second product is a three-layer panel with a face of 4mm-thick European oak, a 7mm-thick pine core, and a 4mm-thick European oak back. For both styles, the grain of each ply runs at a 90-degree angle to that of the subsequent plies. All of the panels are tongued and grooved on all edges and ends…

• N127515 · 2010-11-09 — The tariff classification of plywood flooring panels with face plies of Ipe, Teak, Walnut, Maple, Cherry, Brazilian Cherry, Hickory, Wormy Chestnut, Santos Mahogany, Red Oak, Cypress, White Oak, and Reclaimed Heart Pine from Taiwan

  The ruling was returned to you for additional information, which was resubmitted to this office on October 14, 2010. The ruling was requested on several plywood flooring panels with varying measurements that will be noted herein. The edges and ends of each panel are tongued and grooved. All but one of the panels consists of six plies of wood veneers laminated together so that the grain of each ply runs at an angle to that of the adjacent ply. Each panel is surface covered with a transparent UV coating. Each face ply is laminated to a base of Radiata pine plywood. The Ipe, Teak, American…

• 4412 39 40 11 — With at least one outer ply of Douglas fir (Pseudotsuga menziesii): — Rough, or touch sanded for sizing purposes, but not further processed
• 4412 39 40 12 — With at least one outer ply of Douglas fir (Pseudotsuga menziesii): — Fully sanded on at least one face, but not further processed
• 4412 39 40 19 — With at least one outer ply of Douglas fir (Pseudotsuga menziesii): — Other
• 4412 39 40 31 — With at least one outer ply of long leaf pine (Pinus palustris), short leaf pine (Pinus echinata), southern yellow pine (loblolly pine)(Pinus taeda), slash…
• 4412 39 40 32 — With at least one outer ply of long leaf pine (Pinus palustris), short leaf pine (Pinus echinata), southern yellow pine (loblolly pine)(Pinus taeda), slash…
• 4412 39 40 39 — With at least one outer ply of long leaf pine (Pinus palustris), short leaf pine (Pinus echinata), southern yellow pine (loblolly pine)(Pinus taeda), slash…
• 4412 39 40 51 — With at least one outer ply of Agathis spp.: — Rough, or touch sanded for sizing purposes, but not further processed
• 4412 39 40 52 — With at least one outer ply of Agathis spp.: — Fully sanded on at least one face, but not further processed
• 4412 39 40 59 — With at least one outer ply of Agathis spp.: — Other
• 4412 39 40 61 — Other: — Rough, or touch sanded for sizing purposes, but not further processed
• 4412 39 40 62 — Other: — Fully sanded on at least one face, but not further processed

• 44123 — ТН ВЭД ЕАЭС: фанера клееная прочая, состоящая исключительно из листов древесины (кроме бамбука), толщина каждого из которых не более 6 мм
• 441239 — EU CN/TARIC: Other plywood consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm thickness — Other, with both outer plies of coniferous wood

Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.