Electrolytically plated or coated with zinc
N305527 · 2019-08-21 — The tariff classification of electro-galvanized steel sheets from Japan
The products under consideration, identified as Silver Top TE-90 and TE-91, are electro-galvanized steel sheets with a zinc phosphate coating. In an email to this office, you indicated that TE-90 and TE-91 are essentially the same product; however, the TE-91 sheet has a smoother surface finish and higher heat resistance. Imported in coil form, these cold-rolled nonalloy steel sheets measure 0.188 mm to 0.212 mm in thickness and less than 600 mm in width. According to your submission, the electro-galvanized layer is comprised of zinc, cobalt and molybdenum of which the zinc predominates by…
L88416 · 2005-11-16 — The tariff classification of coated steel bands from Germany.
The products to be imported are cold-rolled steel bands. These bands will either be coated with copper or electrolytically coated with zinc. They are imported in coil form, in this case, packaged on a plastic cassette. These bands measure 3 mm in width, with thicknesses of either .40 mm or .35 mm. These bands will be used on a full-automatic packaging machine in the produce industry. A sample or each type band has been submitted with your request. The applicable subheading for the copper coated bands will be 7212.50.0000, Harmonized Tariff Schedule of the United States (HTS), which provides…
f88526 · 2000-07-05 — The tariff classification of galvanized flat-rolled steel from Canada.
, you requested a tariff classification ruling. The product to be imported is electrogalvanized flat-rolled steel in coil form. The steel measures 0.018 inch in thickness and from 1.913 inches to 2.736 inches in width. The applicable subheading for the electrogalvanized flat-rolled steel will be 7212.20.00, Harmonized Tariff Schedule of the United States (HTS), which provides for flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, clad, plated or coated, electrolytically plated or coated with zinc.. The general rate of duty will be 2.6 percent ad valorem. This…
a88253 · 1996-11-06 — The tariff classification of doctor blade material from Italy.
Descriptive literature was submitted with your ruling request. The products to be imported are described as doctor blades used in a paper machine for the manufacture of paper or paperboard (doctoring). The doctor blades will be made of Type 420 stainless steel (13), Grade 1074 nonalloy steel (ST), "AS Supramet" nonalloy steel, bronze (BZ) and "Monel K500" nickel (MO). According to the submitted literature, the "AS Supramet" steel may be zinc coated. The doctor blades will be imported in material form in continuous coils of 100 meter lengths. The steel material will range from 0.80 mm to 1.27…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product