Otherwise plated or coated
N319012 · 2021-05-05 — The tariff classification of steel flashing materials from China.
Representative photos were submitted with your request. The merchandise in question is 26 gauge (.46 mm) valley roll flashing material used in roofing applications. Comprised of nonalloy steel with a 55% aluminum-zinc alloy (Galvalume) coating, these products are imported in two different configurations. Product 1, imported in coil form, will measure 16” (406.4 mm) in width and 50’ (15240 mm) in length. The tail end of this sheeting is bent to facilitate decoiling. You indicate that these coils will ultimately be cut to length and formed into flashing. Product 2 is a profile shape measuring…
N301037 · 2018-11-07 — The tariff classification of steel doctor blades from Italy
The products under consideration are described as steel doctor blades intended to be used as parts for printing presses. The steel is imported in various chemistries and dimensions. It is stated to be cold-rolled in Sweden and shipped to Italy where the edges are ground. The final product has a ceramic coating and is shipped from Italy to the U.S. In accordance with the definitions of steel in Section XV, Harmonized Tariff Schedule of the United States (HTSUS), the chemistries are described as PS1 which is a nonalloy steel, PS2 and PS4 which are tool steel, PS3 which is an other alloy steel…
N011822 · 2007-05-29 — The tariff classification of various laminated steel products from Germany.
This letter replaces New York Ruling N009974 which you recently received. In reviewing that letter a clerical error in the description of the laminated steel sheet was identified. That error has been corrected in the text below. In your letter dated April 17, 2007, on behalf of Rasselstein GmbH, you requested a tariff classification ruling. The products to be imported are variations of electrolytic tinplate and electrolytic chromium coated steel that have been either laminated with plastic foil or laminated and then lacquered with epoxiphenole. All products are in coil form with thicknesses…
L88416 · 2005-11-16 — The tariff classification of coated steel bands from Germany.
The products to be imported are cold-rolled steel bands. These bands will either be coated with copper or electrolytically coated with zinc. They are imported in coil form, in this case, packaged on a plastic cassette. These bands measure 3 mm in width, with thicknesses of either .40 mm or .35 mm. These bands will be used on a full-automatic packaging machine in the produce industry. A sample or each type band has been submitted with your request. The applicable subheading for the copper coated bands will be 7212.50.0000, Harmonized Tariff Schedule of the United States (HTS), which provides…
I85174 · 2002-08-25 — The tariff classification of coated steel sheet from Taiwan.
The product to be imported is Galvalume coated steel sheet in coils made to ASTM Specification A 792, the Standard Specification for Steel Sheet, 55% Aluminum-Zinc Alloy-Coated by the Hot-Dip Process. The master coil measures 45.175 inch in width, and the sheet will be imported slit to size. The Galvalume aluminum-zinc alloy coating is composed, by weight, of approximately 55% aluminum, 1.6% silicon and the balance zinc. The applicable subheading for the Galvalume coated steel sheet measuring 600 mm or more in width will be 7210.61.0000, Harmonized Tariff Schedule of the United States (HTS),…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product