72149900

Code

72149900

Type

heading / subheading

Duty rate

Free

Tariff lines inside

10

Units of quantity

kg (10)

Classification rulings (U.S. Customs, CROSS)

• I82814 · 2002-07-01 — The tariff classification of steel bars and angles from Turkey.

  The products to be imported are hot-rolled nonalloy steel flat bars, round bars, square bars and angles. These products are made to ASTM Specification A 36 which is the Standard Specification for Carbon Structural Steel. Some typical dimensions of the flat bars are 1/8 inch x ½ inch, 3/16 inch x 1 inch and ¼ inch x ¾ inch. The rounds range in size from ¼ inch to 5/8 inch and the squares from 3/8 inch to 5/8 inch. Some typical dimensions of the angles are ¾ inch x ¾ inch x 1/8 inch and 1 ¼ inch x 1 ¼ inch x 1/8 inch. The applicable subheading for the hot-rolled nonalloy steel flat bars will be…

• i80824 · 2002-04-25 — The tariff classification of steel grouser bars from Brazil.

  The products to be imported are hot-rolled steel grouser bars made of either nonalloy or alloy steel. The grouser bars have a cross section in the shape of a convex polygon and meet the Chapter 72 Note 1. (m) definition for other bars and rods. These bars will be imported in material lengths ranging from 98 inches to 122 inches and will be cut to length after importation. The applicable subheading for the hot-rolled nonalloy steel grouser bars will be 7214.99.00, Harmonized Tariff Schedule of the United States (HTS), which provides for other bars and rods of iron or nonalloy steel, not…

• g87398 · 2001-03-18 — The tariff classification of steel bars from various European countries.

  The products to be imported are carbon steel hot–rolled rectangular flat bars, hot-rolled square bars, cold drawn square bars and cold drawn round bars. The hot-rolled rectangular flat bars come in a wide range of sizes, e.g. 3 mm x 10 mm; 3 mm x 150 mm; 10 mm x 60 mm; 20 mm x 80 mm; 40 mm x 60 mm; 40 mm x 250 mm. The hot-rolled square bars range in size from 5 mm to 150 mm. The cold drawn square and round bars will also be imported in various sizes. Flat-rolled products are defined in Chapter 72 Note 1. (k) as “Rolled products of solid rectangular (other than square) cross section…in the…

• f86569 · 2000-05-17 — The tariff classification of steel bars from Brazil.

  The products to be imported are hot-rolled bars of free-cutting steel, other nonalloy steel and alloy steel. Typical grades of free-cutting steel will be 1212 and 1215; typical grades of other alloy steel will be 1010, 1018 and 1045; typical grades of alloy steel will be 4140 and 8620. These hot-rolled bars are circular in cross-section and will generally measure one inch or more in diameter and range from 8 to 24 feet in length. You state that these bars are defective because they are out of specification, e.g., they do not meet the published industry standards with regard to straightness,…

• E81572 · 1999-06-04 — The tariff classification and status under the North American Free Trade Agreement (NAFTA), of steel plate from Canada; Article 509

  , you requested a ruling on the status of steel plate from Canada under the NAFTA. Hot-rolled flat-rolled nonalloy steel plates ranging from 0.5 inch to 16 inches in thickness, from 40 inches to 80 inches in width and from 120 inches to 160 inches in length are produced in various European countries and imported into Canada. These hot-rolled nonalloy steel plates are classified under heading 7208, Harmonized Tariff Schedule of the United States (HTSUS). In Canada, the hot-rolled plates, which will be used in the production of mold bases and parts of dies for metal stamping machines, undergo…

• 7214 99 00 16 — Rounds: — Containing by weight less than 0.25 percent of carbon: — With a diameter less than 76 mm
• 7214 99 00 21 — Rounds: — Containing by weight less than 0.25 percent of carbon: — With a diameter of 76 mm or more but not exceeding 152 mm
• 7214 99 00 26 — Rounds: — Containing by weight less than 0.25 percent of carbon: — With a diameter exceeding 152 mm
• 7214 99 00 31 — Rounds: — Containing by weight 0.25 percent or more but less than 0.6 percent of carbon: — With a diameter less than 76 mm
• 7214 99 00 36 — Rounds: — Containing by weight 0.25 percent or more but less than 0.6 percent of carbon: — With a diameter of 76 mm or more but not exceeding 152 mm
• 7214 99 00 40 — Rounds: — Containing by weight 0.25 percent or more but less than 0.6 percent of carbon: — With a diameter exceeding 152 mm
• 7214 99 00 45 — Rounds: — Containing by weight 0.6 percent or more of carbon
• 7214 99 00 60 — Other: — Containing by weight less than 0.25 percent of carbon
• 7214 99 00 75 — Other: — Containing by weight 0.25 percent or more but less than 0.6 percent of carbon
• 7214 99 00 90 — Other: — Containing by weight 0.6 percent or more of carbon

• 721499 — ТН ВЭД ЕАЭС: прочие:
• 721499 — EU CN/TARIC: Other — Other

Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.