7214 99 00 16

Code

7214 99 00 16

Type

10-digit tariff line

Duty rate

Free (set at subheading 72149900)

Unit

kg

Classification rulings (U.S. Customs, CROSS)

• N305167 · 2019-08-06 — The tariff classification of tie rods from Germany

  , you requested a tariff classification ruling. A representative sample was submitted with your request and will be retained by this office. The products to be imported are 5 models of weldable (FA) and non-weldable (FC) tie rods: 15 (mm) FC Formworks Tie Rod, Grade 150; 15 (mm) FA Formworks Tie Rod, Grade 160; 20 (mm) FC Formworks Tie Rod, Grade 150; 20 (mm) FA Formworks Tie Rod, Grade 160 and 26 (mm) FA Formworks Tie Rod, Grade 160. Imported in bundles, these cut-to-length nonalloy hot-rolled deformed products will be used solely as temporary anchor rods. Although the sample consists of a…

• I82814 · 2002-07-01 — The tariff classification of steel bars and angles from Turkey.

  The products to be imported are hot-rolled nonalloy steel flat bars, round bars, square bars and angles. These products are made to ASTM Specification A 36 which is the Standard Specification for Carbon Structural Steel. Some typical dimensions of the flat bars are 1/8 inch x ½ inch, 3/16 inch x 1 inch and ¼ inch x ¾ inch. The rounds range in size from ¼ inch to 5/8 inch and the squares from 3/8 inch to 5/8 inch. Some typical dimensions of the angles are ¾ inch x ¾ inch x 1/8 inch and 1 ¼ inch x 1 ¼ inch x 1/8 inch. The applicable subheading for the hot-rolled nonalloy steel flat bars will be…

• i80824 · 2002-04-25 — The tariff classification of steel grouser bars from Brazil.

  The products to be imported are hot-rolled steel grouser bars made of either nonalloy or alloy steel. The grouser bars have a cross section in the shape of a convex polygon and meet the Chapter 72 Note 1. (m) definition for other bars and rods. These bars will be imported in material lengths ranging from 98 inches to 122 inches and will be cut to length after importation. The applicable subheading for the hot-rolled nonalloy steel grouser bars will be 7214.99.00, Harmonized Tariff Schedule of the United States (HTS), which provides for other bars and rods of iron or nonalloy steel, not…

• g87398 · 2001-03-18 — The tariff classification of steel bars from various European countries.

  The products to be imported are carbon steel hot–rolled rectangular flat bars, hot-rolled square bars, cold drawn square bars and cold drawn round bars. The hot-rolled rectangular flat bars come in a wide range of sizes, e.g. 3 mm x 10 mm; 3 mm x 150 mm; 10 mm x 60 mm; 20 mm x 80 mm; 40 mm x 60 mm; 40 mm x 250 mm. The hot-rolled square bars range in size from 5 mm to 150 mm. The cold drawn square and round bars will also be imported in various sizes. Flat-rolled products are defined in Chapter 72 Note 1. (k) as “Rolled products of solid rectangular (other than square) cross section…in the…

• f86569 · 2000-05-17 — The tariff classification of steel bars from Brazil.

  The products to be imported are hot-rolled bars of free-cutting steel, other nonalloy steel and alloy steel. Typical grades of free-cutting steel will be 1212 and 1215; typical grades of other alloy steel will be 1010, 1018 and 1045; typical grades of alloy steel will be 4140 and 8620. These hot-rolled bars are circular in cross-section and will generally measure one inch or more in diameter and range from 8 to 24 feet in length. You state that these bars are defective because they are out of specification, e.g., they do not meet the published industry standards with regard to straightness,…

• 7214 99 00 21 — Rounds: — Containing by weight less than 0.25 percent of carbon: — With a diameter of 76 mm or more but not exceeding 152 mm
• 7214 99 00 26 — Rounds: — Containing by weight less than 0.25 percent of carbon: — With a diameter exceeding 152 mm
• 7214 99 00 31 — Rounds: — Containing by weight 0.25 percent or more but less than 0.6 percent of carbon: — With a diameter less than 76 mm
• 7214 99 00 36 — Rounds: — Containing by weight 0.25 percent or more but less than 0.6 percent of carbon: — With a diameter of 76 mm or more but not exceeding 152 mm
• 7214 99 00 40 — Rounds: — Containing by weight 0.25 percent or more but less than 0.6 percent of carbon: — With a diameter exceeding 152 mm
• 7214 99 00 45 — Rounds: — Containing by weight 0.6 percent or more of carbon
• 7214 99 00 60 — Other: — Containing by weight less than 0.25 percent of carbon
• 7214 99 00 75 — Other: — Containing by weight 0.25 percent or more but less than 0.6 percent of carbon
• 7214 99 00 90 — Other: — Containing by weight 0.6 percent or more of carbon

• 721499 — ТН ВЭД ЕАЭС: прочие:
• 721499 — EU CN/TARIC: Other — Other

Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.