Plated or coated with metal: — Cold-formed
Part of: 721590 — Other:
N237476 · 2013-02-14 — The tariff classification of low carbon steel bar from China
A description and pictorial representations were submitted. The product to be imported is a low carbon zinc plated steel grooved bar. The length of each bar is 13’6” long. The diameter is 25.4mm. The maximum carbon content is .10% . The bar is made to ASTM grade 1008. The applicable subheading for the low carbon steel bar will be 7215.90.3000, Harmonized Tariff Schedule of the United States (HTSUS), which provides for Other bars and rods of iron or nonalloy steel: Other: Plated or coated with metal, cold-formed. The rate of duty will be Free. Duty rates are provided for your convenience and…
N038700 · 2008-10-05 — The tariff classification of anchor wire and bent log wire from China.
Samples and illustrations were submitted. The items you plan to import are described as anchor wire, product number W500148, and bent log wire, product number W3425090. The cold drawn galvanized anchor wire is made of carbon steel and measures 5 inches in length with a diameter of 0.148 inches. You indicate that this wire acts like a stake and will be used to hold garden edging in place. The bent log wire is used to hold split logs together to form a garden border. This cold drawn galvanized carbon steel wire measures approximately 70 inches in length with a diameter of 0.090 inches. Prior to…
M86791 · 2006-10-05 — The tariff classification of steel shafts from Japan.
The product to be imported is described as cold drawn centerless ground rod and bar stock. Cut to length, with diameters ranging from ¼” to 2”, these steel shafts are available in four different chemistries. The stainless product is the equivalent of AISI 440C, the alloy product, also referred to as SUJ2, is the same as AISI 52100 and the carbon products meet the specifications for either AISI 1045 or 1060. Each of these is also available with a chrome plating. All of these products will ultimately be used as guide shafts in hydraulic and pneumatic cylinders in linear machines. The applicable…
967224 · 2004-12-08 — Protest AFR No. 3901-04-100362; hanger and tie wire
This is our decision on the application for further review (AFR) of protest no. 3901-04-100362, filed against your classification of hanger and tie wire, under the Harmonized Tariff Schedule of the United States (HTSUS). The subject nine entries were liquidated on December 5, 2003, and this protest and AFR was timely filed on March 2, 2004. Our decision follows receipt of samples and photographs of the subject merchandise by letter dated September 21, 2004, and a teleconference held on October 7, 2004, between the protestant and its counsel, and members of the staff of the Office of…
J80797 · 2003-03-06 — The tariff classification of steel wire from various countries.
The product to be imported is low carbon galvanized steel wire measuring 0.1055 inch in diameter. The wire will be imported both in coils and in 12-foot cut lengths. The applicable subheading for the cut-to-length galvanized steel wire will be 7215.90.3000, Harmonized Tariff Schedule of the United States (HTS), which provides for other bars and rods of iron or nonalloy steel, other, plated or coated with metal, cold-formed. The rate of duty will be 0.8 percent ad valorem. The applicable subheading for the galvanized steel wire in coils containing less than 0.25 percent by weight of carbon…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product